MPN ASA5555-2SSD120-K9
EAN / UPC 882658553936
Krājumi
Cisco® ASA 5500-X Series Next-Generation Firewalls integrate the world’s most proven stateful inspection firewallwith a comprehensive suite of next-generation firewall services for networks of all sizes - small and midsize businesses with one or more locations, large enterprises, service providers, and mission-critical data centers. Cisco ASA 5500-X Series Next-Generation Firewalls deliver Cisco MultiScale™ performance with industry-leading service flexibility, modular scalability, feature exten...
Lasīt pilnu aprakstu4000 Mbit/s
4 Gbit/s
1300 Mbit/s
50000
250
2
700 Mbit/s
0,7 Gbit/s
1U
Yes
Y
16384 MB
500
0 - 4572 m
0 - 3050 m
10 - 90 %
-5 - 40 °C
10 - 90 %
-25 - 70 °C
4000 Mbit/s
700 Mbit/s
13,57 kg
1000000
458 BTU/h
Wired
6
1
2
50 - 60 Hz
100-240 V
15 A
1
134 Watt
90 Watt
13,47 kg
3DES
1
Yes
120 GB
SSD
240 GB
3 Month(s)
429 x 484 x 42.4 mm
Cisco® ASA 5500-X Series Next-Generation Firewalls integrate the world’s most proven stateful inspection firewallwith a comprehensive suite of next-generation firewall services for networks of all sizes - small and midsize businesses with one or more locations, large enterprises, service providers, and mission-critical data centers. Cisco ASA 5500-X Series Next-Generation Firewalls deliver Cisco MultiScale™ performance with industry-leading service flexibility, modular scalability, feature extensibility, and low deployment and operation costs.
Problem Description
ASA 5500-X security appliances that shipped from March 16, 2012 through June 11, 2012 contain the incorrect factory default configuration. This requires the user to follow special procedures for system initialization.
Background
The ASA 5500-X appliances shipped from March 16, 2012 through June 11, 2012 were not loaded with the correct factory default configuration and must be initialized using special commands. The procedures contained in the Quick Start Guide are insufficient to properly initialize the affected units.
Problem Symptoms
Users attempting to initialize the affected ASA 5500-X appliances using the Quick Start Guide will observe that the management 0/0 ports are in the down/down condition. In addition, ASDM for on box management is not accessible.
Workaround/Solution
The factory default configuration can be applied using the following command:
config factory-default
Note that the ASA 5515-X appliance does not support the command above due to Cisco bug ID CSCtz73669. The unit must be restored to the factory default configuration using the command series shown below.
*Iepriekš minētos datus par produktu sniedz Icecat. EET nevar būt atbildīgs par kļūdām saistībā ar to.