MikroTik 1x 1G Ethernet, 2x 25G SFP28, AL52400, IP20, RouterOS

MikroTik 1x 1G Ethernet, 2x 25G SFP28, AL52400, IP20, RouterOS

MPN CCR2004-1G-2XS-PCIE

Varenr. W126661270

EAN/UPC 4752224007926

Lagernivå

A smart PCIe network interface card that adds full-fledged router capabilities to your servers. The smart and easy way to create 25 Gigabit networks if you want to save space in your server room!

Save space in your server room by adding a real CCR2004.. within the server itself! This unique product combines a simple 2x 25 Gigabit PCIe Ethernet adapter with the impressive capabilities of a fully-fledged router.

By default, the PCIe interface will show up as four virtual Ethernet...

Les hele beskrivelsen

    Spesifikasjoner for CCR2004-1G-2XS-PCIE

    Design

    Certification

    CE, EAC, ROHS

    Component for

    PC

    Internal

    Yes

    Mean time between failures (MTBF)

    200000 Hour

    Network

    Ethernet LAN data rates

    10, 100, 1000

    Operational conditions

    Operating temperature (T-T)

    -20 - 60 °C

    Package dimensions

    Depth (package,cm)

    3,3 cm

    Gross Weight (Package, kg)

    0,28 kg

    Height (package,cm)

    22,8 cm

    Width (package,cm)

    12,6 cm

    Ports & interfaces

    Connectivity technology

    Wired

    Ethernet LAN (RJ-45) ports

    1

    Fiber optic connector

    SFP28

    Fiber ports quantity

    2

    Host interface

    PCI Express

    Interface

    Ethernet / Fiber

    Product dimensions

    Net Weight (Product, kg)

    0,23 kg

    Product Depth

    1,8 cm

    Product Height

    6,9 cm

    Product Width

    17 cm

    Vendor information

    Brand Name

    Warranty

    15 Month(s)

    Beskrivelse

    1x 1G Ethernet, 2x 25G SFP28, AL52400, IP20, RouterOS

    A smart PCIe network interface card that adds full-fledged router capabilities to your servers. The smart and easy way to create 25 Gigabit networks if you want to save space in your server room!

    Save space in your server room by adding a real CCR2004.. within the server itself! This unique product combines a simple 2x 25 Gigabit PCIe Ethernet adapter with the impressive capabilities of a fully-fledged router.

    By default, the PCIe interface will show up as four virtual Ethernet interfaces. Two interfaces in passthrough mode to the 25G SFP28 cages. Remaining two virtual Ethernet-PCIe interfaces are bridged with the Gigabit Ethernet port for management access. The user can configure all interfaces and settings freely since we are running fully functional RouterOS here.

    To get this CCR device to work as an NIC, a new Passthrough mode was implemented. Basically, a FastForward FastPath mode that can also pass hardware link statuses.

    This NIC can reach wire-speed (100Gbps) with Jumbo frames. It ensures that in most server setups this CCR network card will not be the bottleneck.

    With 4 GB of RAM, 128 MB of NAND storage, and a powerful quad-core ARMv8 64-bit CPU, this device can handle a lot: firewalls, user management and access control for home media and file servers, and even some traffic control in data centers – without the need for a stand-alone router.

    This form-factor does come with certain limitations that you should keep in mind. The CCR NIC card needs some time to boot up compared to ASIC-based setups. If the host system is up before the CCR card, it will not appear among the available devices. You should add a PCIe device initialization delay after power-up in the BIOS. Or you will need to re-initialize the PCIe devices from the HOST system.

    We are looking forward to see your unique use-cases for this unconventional device: a simple high-speed networking card combined with a powerful Cloud Core Router.

    Unleash the potential of your server with the fierce power of RouterOS!

    *Produktinformasjonen ovenfor er levert av Icecat. EET kan ikke holdes ansvarlig for feil i forbindelse med dette.

    EET NorgeOlaf Helsets vei 60694 OsloMVA-nr. 956967864
    Norge / Norsk