Mounting plate with Tilt Swivel, parallell center point.

Mounting plate with Tilt Swivel, parallell center point. The choice for an adjustable screen angle, the screen will be placed to the left/right of the center of the ProClip. Fits monitors with a vertical slot in back. Install onto ProClip. Attention! Please read all of the instructions and look at the pictures before attaching the screen mount.

1. Unscrew the screw on the lower part of the faceplate and remove it.

2. Place the base plate of the Tilt Swivel onto the ProClip dash mount (or any other mount or flat surface). Screw the plate to the ProClip dash mount using the enclosed screws. (As long as you are screwing the plate to the ProClip you don't have to remove the cover of the adhesive tape)

3. Place the faceplate over the base plate and screw the pieces together. Adjust the faceplate to desired position and tighten the screw further.

4. The Navigation Screen Mount is in place.