- Sākums
- Serveru, datoru un printeru daļas
- Printeri un rezerves daļas
- Drukas piederumi
- 3D kārtridži
- eSTUFF PLA 1,75mm 1KG Translucent(Gearlab box) – GLB251270
eSTUFF PLA 1,75mm 1KG Translucent(Gearlab box)
eSTUFF PLA 1,75mm 1KG Translucent(Gearlab box)
MPN GLB251270
Preces Nr. W126146179
EAN / UPC 5704174477938
Krājumi
Šīs preces daudzums ir ierobežots
Elite Series PLA a fully biodegradable polymer with excellent properties that ensures a highly efficient printing with an extremely good adhesion of printed items to the build beds of 3D printers.
Major advantages of PLA is the very good layer cohesion, excellent surface quality and low processing shrinkage. It is particularly useful for 3D printers without a closed build chamber and produces consistent and reliable results.
The biodegradable propterties means that PLA will slowly ...
Environmentally friendly, bio-degradable polymer
Printing temperature: 185-215° C
Bed temperature: 0-45° C
Printing speed: 40-150 mm/s
Līdzīgas alternatīvas
Specifikācijas GLB251270
Features
Brand compatibility
Universal
Diameter tolerance
0,05 mm
Elongation at break
4 %
Flexural modulus
2150 MPa
Flexural strength
63 MPa
Impact strength
46,1 kJ/m²
Melting point (max)
180 °C
Non-toxic
Yes
Print speed
150 mm/sec
Print temperature guideline
210 °C
Printing colours
Translucent
Printing material
Polylactic acid (PLA)
Tensile strength
1260 kPa
Package dimensions
Depth (package,cm)
7,5 cm
Gross Weight (Package, kg)
1,12 kg
Height (package,cm)
20,5 cm
Width (package,cm)
20,5 cm
Product dimensions
Net Weight (Product, kg)
1,05 kg
Product Depth
7 cm
Product Height
20 cm
Product Width
20 cm
Vendor information
Brand Name
Warranty
1 Gads (-i)
Weight & dimensions
Diameter
1,75 mm
Apraksts
PLA 1,75mm 1KG Translucent(Gearlab box)
Elite Series PLA a fully biodegradable polymer with excellent properties that ensures a highly efficient printing with an extremely good adhesion of printed items to the build beds of 3D printers.
Major advantages of PLA is the very good layer cohesion, excellent surface quality and low processing shrinkage. It is particularly useful for 3D printers without a closed build chamber and produces consistent and reliable results.
The biodegradable propterties means that PLA will slowly start to decompose when exposed to UV-radiation and moisture. If dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional plastics where degradation can take up to 500-1,000 years.
Dokumenti
*Iepriekš minētos datus par produktu sniedz Icecat. EET nevar būt atbildīgs par kļūdām saistībā ar to.