MPN LIG1014A
Varenr. W126134056
EAN/UPC 822088079569
Lager
- Economical switch delivers features normally found in more expensive switches.
- SFP ports enable single-mode or multimode Gigabit fiber uplinks over long distances.
- 10-/100-/1000-Mbps ports are autosensing for speed and duplex.
- Rated for extreme temperatures of -40 to +75° C.
- Dual DC power inputs for redundancy.
- IP30-rated housing is also rated for shock and vibration protection.
- Manage through a Web interface, SNMP, or command-line interface (CLI). Check
- Feat...
Provides ten 10-/100-/1000M copper ports plus four multirate SFP-slots.
Fully managed via SNMP, Telnet, HTTPS, and CLI.
L2 wire speed switching.
9K jumbo frames.
8K MAC forwarding addresses.
High redundancy with network redundant LACP and Spanning Tree (STP/RSTP/MSTP).
Reliable with a link loss recovery
State-of-the-art VLAN capabilities and VLAN mirroring.
Support 802.1p and TOS/DS Quality of Service with four queues per port.
Efficient bandwidth utilization with IGMP v1/v2 to multicast video over the network.
9000
Yes
8000 entries
8
0,5 MB
Yes
UL508/CSA C22, EN61010-1, CE, FCC 15, CISPR22 (EN55022) A, IEC60068-2-6, -27, -32, IEC61000-4-2, -3, -4, -5, -6, RoHS, WEEE
Yes
IP30
LAN, Power
Black
Yes
Yes
Managed
Yes
Yes
Yes
255
No
Yes
Yes
Yes
Yes
IEEE 802.1D, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3x
Yes
Yes
5 - 95 %
-40 - 75 °C
-40 - 85 °C
12 - 58 V
0,87 kg
85176990
10
Gigabit Ethernet (10/100/1000)
RS-232
SFP
4
12 - 58 V
11 Watt
No
0,87 kg
18,4 cm
1,9 cm
21,3 cm
MAC-based authentication
DHCP server, DHCP client
Yes
802.1x RADIUS, HTTPS, SNMP, SSH
1 År
- Economical switch delivers features normally found in more expensive switches.
- SFP ports enable single-mode or multimode Gigabit fiber uplinks over long distances.
- 10-/100-/1000-Mbps ports are autosensing for speed and duplex.
- Rated for extreme temperatures of -40 to +75° C.
- Dual DC power inputs for redundancy.
- IP30-rated housing is also rated for shock and vibration protection.
- Manage through a Web interface, SNMP, or command-line interface (CLI). Check
- Features bandwidth rate control, traffic prioritization, and quality of service.
- DIN rail or wall mount.
Multiple ports for flexibility.
This switch has ten 10/10/1000-Mbps RJ-45 copper ports and four RJ-45/SFP copper/fiber Gigabit combo ports for uplinks. It offers full wire-speed forwarding rates, autonegotiates for network speeds, and Auto-MDI/MDI-X, eliminating the need for crossover cables.
Maximize uptime.
Advanced management features help minimize network downtime by enabling you to remotely diagnose and manage network problems. And you'll eliminate the need to send IT technicians on site—thus lowering costs.
The switch is fully manageable through SNMP, a Web browser, Telnet, or a console port. Control the bandwidth on each port individually and set up Quality of Service (QoS) priority queuing for critical applications.
The switch supports port-based VLAN and IEEE 802.1Q VLAN tagging, MAC-based trunking, IP-multicast IGMP snooping, rapid spanning tree for redundancy. Plus, it has 802.1x port-based authentication for security.
Fast failovers.
The switch gives you maximum network flexibility: Spanning Tree Protocol (STP/RSTP), Link Aggregation Control Protocol, and a ring protocol. It offers a 20 millisecond or less failover.
Extreme applications.
- Encased in an IP30-rated metal case, this switch withstands extreme temperatures from -40°C to +75°C (-40° F to +167° F). Use it for:
- Security and surveillance, particularly to backhaul IP security camera data.
- Military applications, especially in ships and other vehicles.
- Factory automation for controlling machinery, PLCs, motor drives, sensors, counters, inspection cameras, and packaging equipment.
- Oil and gas fields or remote equipment monitoring and control.
- Building automation for controlling HVAC and lighting systems.
Installation options.
The switch features redundant power inputs and includes a DIN-rail mount. The panel and rack mounting kits and power supplies (MDR-40-12, MDR-40-24, MDR-40-48, and SDR-240-48) are sold separately. The switch also includes a serial cable (RJ-45/DB9) for the console connection.
*Produktdata ovenfor leveres af Icecat. EET kan ikke holdes ansvarlig for fejl i forbindelse hertil.