MPN LES431A
P/N W126133764
Poziom zapasów
DETAILS
- UL Listed for use in Class 1 Division 2 hazardous areas.
- NEMA TS-2 rated for use in transportation applications.
- Routes Modbus traffic based on Modbus ID, and remaps conflicting Modbus IDs.
- Offers Modbus messaging priority control, selectable by source or function code.
- Features a built-in Web server and easy-to-use management software.
- Can be easily integrated into most Modbus network configurations.
- Converts ASCII to RTU as well as ...
Provides a gateway between Modbus® TCP and Modbus ASCII or RTU devices.
Allows older PLCs and similar devices to talk to newer TCP sensors and meters.
Enables you to monitor a serial industrial device from your office.
Rugged design for operation in a wide temperature range.
UL® Listed for use in Class 1 Division 2 hazardous areas.
NEMA TS-2 rated for use in transportation applications.
Routes Modbus traffic based on Modbus ID, and remaps conflicting Modbus IDs.
Offers Modbus messaging priority control, selectable by source or function code.
Features a built-in Web server and easy-to-use management software.
Can be easily integrated into most Modbus network configurations.
FCC Part 15, Class A, CE, NEMA TS2, UL Class 1, Division 2, Groups A, B, C, D
IP30
Black
Yes
10 - 95 %
-40 - 80 °C
-40 - 85 °C
0,34 kg
10/100Base-T(X)
1
10 - 58 V
4000 mA
0,34 kg
0,254 cm
0,254 cm
0,254 cm
TCP, IPv4, UDP, ARP, HTTP 1.0, ICMP/PING, DHCP/BOOTP, DHCP,, TCP
Windows Server 2003/Windows Server 2008
Windows 7/Windows Vista/Windows XP Home/Windows XP Home x64/Windows XP Professional/Windows XP Professional x64
Yes
230400 Kbit/s
FCC Part 15, Class A, CE, NEMA TS2, UL Class 1, Division 2, Groups A, B, C, D
5/6/7/8
0,234 Mbit/s
Yes
IEEE 802.3
CTS/DCD/DSR/DTR/GND/RTS/RXD/TXD
GND
Data-/Data+/GND
RS-232/422/485
1
1/1.5/2
6 Month(s)
81 x 119 x 30 mm
DETAILS
- UL Listed for use in Class 1 Division 2 hazardous areas.
- NEMA TS-2 rated for use in transportation applications.
- Routes Modbus traffic based on Modbus ID, and remaps conflicting Modbus IDs.
- Offers Modbus messaging priority control, selectable by source or function code.
- Features a built-in Web server and easy-to-use management software.
- Can be easily integrated into most Modbus network configurations.
- Converts ASCII to RTU as well as ASCII or RTU to Modbus TCP.
- Features a DB9 port and terminal block for serial connections.
- Equipped with a 10-/100-Mbps port for TCP connectivity.
- Boasts high throughput with low latency.
- Slim IP30 enclosure saves you on DIN rail space.
- Includes a DIN mounting clip and spring.
Easily integrate an older serial Modbus device into your Ethernet Modbus network. This rugged serial server gives you a simple way to migrate to an Ethernet-based industrial control system—without having to replace the older Modbus equipment you've already invested in. Translating older and newer protocols, the 1-Port Modbus Hardened Serial Server converts mismatched serial baud rates and settings, enabling the serial Modbus device to become a node on your Ethernet network. Older PLCs can then talk to newer sensors, meters, scales, and other industrial monitoring and automation instruments. Configuration can be done through a direct serial connection or via the network, so you can improve productivity and cut down on the amount of time required to troubleshoot a serial device on a factory floor or in a remote location. Configure devices, upgrade firmware, and more—all this from the comfort of your office. A simple-to-install, user-friendly software application enables programming. No time-consuming setup is required. The software also features Modbus messaging priority control and allows management through multiple TCP/IP client sessions. The serial server can be configured for TCP client or server operation. A built-in traffic monitor provides instant verification of a successful installation, and you can view the serial server's operational status in real time. The 1-Port Modbus Hardened Serial Server has a standard DB9 serial port for RS-232 device connections and a removable terminal block for an RS-422 or RS-485 device connection. It also has an autodetecting 10BASE-T/100BASE-TX port for the Ethernet network connection. Either device on either side can be a Modbus master or slave, customizable to your application. A serial master can be configured to control an IP slave, for instance. Also, a serial slave device can be accessed over a LAN or WAN by up to 16 simultaneous Modbus TCP masters.
*Powyższe dane produktu zostały dostarczone przez firmę Icecat. Firma EET nie ponosi odpowiedzialności za błędy w tym zakresie.