MPN J8753A-RFB
Poziom zapasów
The HP 7000dl Series Router provides an affordable and scalable platform for small and medium businesses as well as medium and large enterprise organizations to connect branch offices to their headquarter locations. The A7000dl Series offers a variety of WAN interface modules and supports wire-speed routing performance with integrated security and convergence capabilities to secure branch office connections edge to edge while simplifying the deployment, management, and support of routers.
Y/Yes
Grey
1U
Yes
32 MB
Yes
Yes
10/100Base-T(X)
Fast Ethernet
Yes
10/100 Mbit/s
Yes
IEEE 802.3/IEEE 802.3u
0 - 95 %
0 - 50 °C
292.6 x 442.5 x 43.9 mm
5,9 kg
2
1
50 - 60 Hz
100 - 240 V
50 Watt
5,800000000000001 kg
29,26 cm
4,39 cm
44,25 cm
Yes
Yes
RIP, RIPv2, OSPF, BGP4
Network address translation (NAT) firewall
802.1x RADIUS/SSH/SSH-2/SSL/TLS
1 Rok/Lata
Yes
The HP 7000dl Series Router provides an affordable and scalable platform for small and medium businesses as well as medium and large enterprise organizations to connect branch offices to their headquarter locations. The A7000dl Series offers a variety of WAN interface modules and supports wire-speed routing performance with integrated security and convergence capabilities to secure branch office connections edge to edge while simplifying the deployment, management, and support of routers.
Features
Layer 2/3/4 QoS mechanisms: IEEE 802.1p marking, precedence, and DiffServ priority tagging based on IP address, IP Type of Service (ToS), L3 protocol, TCP/UDP port number, and source port
QoS maps on Ethernet interfaces: map IEEE 802.1p marking to Layer 3 QoS tag based on ACL settings
Scheduling mechanisms: supports Weighted Fair Queuing (WFQ), FIFO, Low Latency Queuing (LLQ), and Priority Queuing (PQ)
Class-Based Weighted Fair Queuing (CBWFQ): allows allocation of bandwidth to a particular class of traffic based on a percentage of total available bandwidth or maximum kbps throughput
Traffic shaping and QoS support for Ethernet ports: allow the ability to apply WFQ, LLQ, and CBWFQ mechanisms to Ethernet ports based on DiffServ Code Point settings
Equal-cost multi-path (ECMP) for BGP, OSPF, and static routes: provides the ability to load-balance traffic across multiple WAN connections
Multilink capability: MLFR and MLPPP enable multiple T1/E1 ports to be aggregated and dynamically load-balanced across Frame Relay or PPP links
Multi-homing BGP support: supports redundant WAN connections to multiple service providers using BGP routing protocol
Network monitor: Provides performance testing and Layer 3 network connectivity monitoring for integrated IP interfaces and externally connected ADSL/cable modems; can be used to initiate a demand routing backup connection based on the status of IP links
Optional redundant power supply: provides uninterrupted power (provided by HP 600 RPS/EPS)
VLAN support and tagging: support complete IEEE 802.1Q (4,096 VLAN IDs)
IP multicast: supports PIM SM, IGMPv2, and multicast stub routing
PIM Sparse mode: routes IP multicast traffic using PIM Sparse mode (PIM-SM)
DHCP support: acts as a DHCP server, relay, or client
SNTP Client/Server: SNTP client: obtains time settings from NTP server using SNTP. SNTP server: device will respond to SNTP client requests for time settings.
*Powyższe dane produktu zostały dostarczone przez firmę Icecat. Firma EET nie ponosi odpowiedzialności za błędy w tym zakresie.