MPN LB20-PC60EW-5D
EAN / UPC 8717332943456
Készlet szint
The loudspeaker shall be a surface mount, two-way, full-range system, with an internal passive crossover. The loudspeaker's low-frequency transducer shall be a 5.25" (133 mm) woofer, with a weather resistant polypropylene cone, and a 1" (25 mm) voice-coil. The loudspeaker's high-frequency transducer shall be a 0.75" (20 mm) Ferro fluid cooled driver, coupled to a baffle-integrated waveguide.
The loudspeaker system shall meet the following performance criteria: Power handling, 75 W of IEC ...
Carefully engineered for the toughest weather conditions (IP65)
Long throw 5.25" (133 mm) woofer housed in a UL 94-5VB fire rated ABS plastic for extended LF performance down to 55 Hz
90 W power handling provides for 108 dB maximum SPL (114 dB Peak)
60 W transformer with 8 Ω pass-through
Built-in
55 - 20000 Hz
8 Ω
300 Watt
75 Watt
89 dB
2.0 csatornák
Polypropylene
2
1
1
Tabletop/bookshelf, Wall-mountable
2-way
Yes
2 cm
0,75 "
Yes
13,3 cm
5,25 "
32,5 cm
7,74 kg
42 cm
26 cm
Yes
2 db
Yes
IEC 60068-2-5, IEC 60068-2-11, IEC 60068-2-42, IEC 60068-2-60, IEC 60529
Acrylonitrile butadiene styrene (ABS), Aluminium
Black
Universal
Yes
No
Wired
70 - 100 V
AC
7.5, 15, 30, 60
6,41 kg
0,26 cm
0,42 cm
0,325 cm
3 Év(ek)
19,5 cm
The loudspeaker shall be a surface mount, two-way, full-range system, with an internal passive crossover. The loudspeaker's low-frequency transducer shall be a 5.25" (133 mm) woofer, with a weather resistant polypropylene cone, and a 1" (25 mm) voice-coil. The loudspeaker's high-frequency transducer shall be a 0.75" (20 mm) Ferro fluid cooled driver, coupled to a baffle-integrated waveguide.
The loudspeaker system shall meet the following performance criteria: Power handling, 75 W of IEC 60268-5 continuous pink noise (6 dB crest factor); Frequency response, 55 Hz - 20 kHz (-10 dB from rated sensitivity); Sensitivity, 89 dB at one watt, 100 Hz - 10 kHz at one meter; Impedance, 8 Ohm nominal, 6.5 Ohm minimum.
The loudspeaker shall have a transformer suitable for use on 70 V or 100 V distributed lines. The transformer shall have taps ranging from 7.5 W to 60 W, plus an 8 Ohm bypass, selectable using a switch on the rear of the enclosure. The 8 Ohm bypass selection shall be protected by a safety screw.
The high-frequency transducer shall drive a waveguide to cover evenly 90° horizontally by 90° vertically. The finish shall be black (RAL 9004) or white (RAL 9003). The grille shall be marine grade aluminum. The loudspeaker shall be adjustable over a range of 90° vertically, using a U-Bracket.
The loudspeaker shall have an included U-Bracket. The U-Bracket shall be marine grade aluminum. Electrical connections shall be through a 4-pin detachable Euroblock connector on the input panel. The loudspeaker should include an IP65 weather cover for the input panel.
*A fenti termékadatokat az Icecat szolgáltatja. Az EET nem tehető felelőssé az ezzel kapcsolatos hibákért.