MPN JC103A-RFB
EAN / UPC 5706998995780
Laoseis
HP A5800 switches offer an unmatched combination of Gigabit and 10-Gigabit Ethernet port density, high-availability architecture, and full Layer 2 and Layer 3 dual-stack IPv4 and IPv6 capabilities. Besides wire-speed line-rate performance on all ports, the switches include patented Intelligent Resilient Framework (IRF) technology and Rapid Ring Protection Protocol (RRPP) that allow local or geographically distributed A5800 switches to be interconnected for higher resiliency and performance. Avai...
Loe täielikku kirjeldust32000 sisestust
10 Gbit/s
4 MB
1000Mbit/s
208 Gbit/s
VCCI, EN, ICES, ANSI, AS/NZS, EMC, FCC
Black
UL, EN, IEC, CAN/CSA, Anatel, ULAR, GOST, FDA, NOM, ROHS
MIB II, Bridge MIB, BGP-4 MIB, RIPv2 MIB, OSPFv2 MIB, IPV6-TCP-MIB, IPV6-UDP-MIB, IPv6 MIB, ICMPv6 MIB, SNMP-MPD MIB, Ethernet-Like-MIB, VRRP MIB, MAU-MIB, MAU-MIB, Entity MIB
Yes
L3
Managed
Yes
Yes
Yes
Yes
Yes
Yes
Yes
IEEE 802.1ag, IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1v, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x
4096
16000
Yes
498 BTU/h
10 - 90 protsenti
32 - 113 °F
0 - 45 °C
Wired
17.32 x 16.81 x 1.72 "
427 x 440 x 43.6 mm
50/60 Hz
100 - 240 V
Gigabit Ethernet
18,74 lbs
No
0,1 kg
512 MB
512 MB
SDRAM
29
RS-232
24
28
4
100 - 240 V
No
0,09000000000000001 kg
LLDP
IGMP, SNMPv1/v2c/v3
IPv6, CMPv6, UDP, ICMP, TCP, ARP, Telnet, BOOTP, TFTP
Yes
DHCP server, DHCP client
Yes
Yes
802.1x RADIUS, SSH, SSL/TLS
Yes
1 Aasta(d)
HP A5800 switches offer an unmatched combination of Gigabit and 10-Gigabit Ethernet port density, high-availability architecture, and full Layer 2 and Layer 3 dual-stack IPv4 and IPv6 capabilities. Besides wire-speed line-rate performance on all ports, the switches include patented Intelligent Resilient Framework (IRF) technology and Rapid Ring Protection Protocol (RRPP) that allow local or geographically distributed A5800 switches to be interconnected for higher resiliency and performance. Available in PoE and non-PoE models and 1 RU and 2 RU flex chassis configurations, A5800 switches are built on open standards and include an open application architecture (OAA) module slot that that enables flexible deployment options for new services. These versatile switches are ideal for use in the network core for a building or department, or as a high-performance switch in the convergence layer or network edge of enterprise campus networks.
Quality of Service (QoS)
• Powerful QoS feature: creates traffic classes based on access control lists (ACLs), IEEE 802.1p precedence, IP, DSCP or Type of Service (ToS) precedence; supports filter, redirect, mirror, or remark; supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), weighted fair queuing (WFQ), weighted random early discard (WRED), weighted deficit round robin (WDRR), and SP+WDRR
Management
• Remote configuration and management: is available through a secure Web browser or a command-line interface (CLI)
Connectivity
• High-density port connectivity: supports up to 84 1-Gigabit ports per unit/612 per stack
Performance
• Hardware-based wire-speed access control lists (ACLs): feature-rich ACL implementation (TCAM based) helps ensure high levels of security and ease of administration without impacting network performance
Manageability
• Full-featured console: provides complete control of the switch with a familiar command-line interface (CLI)
Layer 2 switching
• GARP VLAN Registration Protocol (GVRP): allows automatic learning and dynamic assignment of VLANs
Layer 3 services
• Address Resolution Protocol (ARP): determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network
*Ülaltoodud tooteandmed esitab Icecat. EET ei saa pidada vastutavaks sellega seotud vigade eest.