Layer-3 Lite access switch with PoE for cost-efficient networking
The fully managed switch LANCOM GS-3152P is ideal for cost-effective networking of less data-intensive end devices such as IP telephones, printers, or PCs. Equipped with PoE+ support on 36 of the 48 Gigabit Ethernet ports, 4 SFP ports and basic layer-3 functions such as static routing and DHCP, this switch offers intelligent management and numerous security functions. Orchestrated from the LANCOM Management Cloud, it is configured efficiently and automatically.

Performance and cost optimization on 52 ports
The LANCOM GS-3152P is equipped with 48 Gigabit Ethernet ports, as well as 4 SFP ports. With a data throughput of 104 Gbps on the backplane, it offers full performance even under load. This switch is thus the basis for integrating large numbers of end devices with moderate data throughput, such as printers or IP telephones, into modern network infrastructures.

Static routing for fast data exchange
The LANCOM GS-3152P supports static routing, the basic layer-3 function that enables these switches to perform a range of routing tasks. Predefined network routes through one or more network segments accelerate data exchange, especially where internal data volumes are high, and they reduce the load on the router. Router capacities are freed up to handle the external data traffic. This improves efficiency across the network as a whole.

Centralized power supply without additional electrical installation
The LANCOM GS-3152P is a high-performance PoE switch that directly powers PoE devices connected to it; there is no need for additional power supply units or cabling. It supports the Power-over-Ethernet standards IEEE 802.3af (PoE) and IEEE 802.3at (PoE+) on 36 ports. With an overall output of 370 Watts, it efficiently supplies power to PoE devices with moderate energy demands.

Secure remote management
Secure communication protocols such as SSH, SSL and SNMPv3 mean that the LANCOM GS-3152P is ideal for professional remote network management. The switch also supports the TACACS+ protocol for authentication, authorization and accounting. This solution is optimized for maximum security for multi-site network management and monitoring.

Configurable access control
The LANCOM GS-3152P excludes rogue clients from gaining unauthorized access to the network. This is ensured by secured access control on all ports as per IEEE 802.1X (port-based, single, multi, and MAC-based).

IPv6 and IPv4 support
Thanks to the dual-stack implementation, the LANCOM GS-3152P operates in pure IPv4, pure IPv6, or in mixed networks. This means that applications such as SSL, SSH, Telnet, and TFTP continue to operate on IPv6 networks. Supported IPv6 features include stateless auto-configuration, the discovery of neighboring devices, and MLD snooping.

Cloud-managed LAN
The LANCOM Management Cloud opens the way to the most advanced switch management: Cloud-managed LAN. The LMC orchestrates the port profiles for each switch and automatically assigns the necessary network configuration, e.g. the required VLANs. At the click of a mouse, switch configurations that are fully customized to each site's network architecture are rolled-out or updated simultaneously.

DHCP server functions
The switch is able to independently and automatically assign IP addresses to clients. The LANCOM GS-3152P supports this basic layer-3 function and handles the IP management of the network connected to it.