- Startseite
- Überwachung & Sicherheit
- Infrastruktur
- Kabelgebundenes Netzwerk
- Netzwerk-Transceiver / SFP / GBIC-Module
- ComNet 10 Mbit/s, SFP, 3.3V, 14x74.1x12.4mm, 30g, Grey – CL-SFP1
ComNet 10 Mbit/s, SFP, 3.3V, 14x74.1x12.4mm, 30g, Grey
ComNet 10 Mbit/s, SFP, 3.3V, 14x74.1x12.4mm, 30g, Grey
MPN CL-SFP1
Lagerbestand
Small Form-Factor Pluggable Copper Range Extender Module
The ComNet CopperLine CL-SFP is a small form-factor pluggable Ethernet extender module that improves bandwidth and distance of existing copper networks. It helps avoid installation costs of new fiber lines on site by allowing full 10 Mbps or 100 Mbps Ethernet bandwidth to be extended over 2-wire twisted pair or coaxial cable. Housed in a small form-factor pluggable (SFP) module enclosure, it is designed for plug-and-play inst...
Spezifikationen für CL-SFP1
Features
Produktfarbe
Grey
RoHS-Konformität
Yes
Zertifizierung
FCC, CE, UL
Operational conditions
Betriebstemperatur (TT)
-40 - 75 °C
Lagertemperatur (TT)
-40 - 85 °C
Relative Luftfeuchtigkeit im Betrieb (HH)
0 - 90 %
Package dimensions
Depth (package,cm)
2 cm
Gross Weight (Package, kg)
0,02 kg
Height (package,cm)
10 cm
Width (package,cm)
7 cm
Performance
Maximum Datenübertragungsrate
10 Mbit/s
Oberflächentyp
SFP
SFP-Transceiver-Typ
Copper
Power
Maximum Spannung
3,3 V
Stromverbrauch (typisch)
1 Watt
Product dimensions
Height (product,cm)
1,24 cm
Net Weight (Product, kg)
0,01 kg
Product Width
1,4 cm
Tiefe cm
7,41 cm
Technical details
Nachhaltigkeitszertifikate
RoHS
Vendor information
Brand Name
Warranty
2 Jahre)
Beschreibung
10 Mbit/s, SFP, 3.3V, 14x74.1x12.4mm, 30g, Grey
Small Form-Factor Pluggable Copper Range Extender Module
The ComNet CopperLine CL-SFP is a small form-factor pluggable Ethernet extender module that improves bandwidth and distance of existing copper networks. It helps avoid installation costs of new fiber lines on site by allowing full 10 Mbps or 100 Mbps Ethernet bandwidth to be extended over 2-wire twisted pair or coaxial cable. Housed in a small form-factor pluggable (SFP) module enclosure, it is designed for plug-and-play installation into any 100BASE-FX Ethernet unit with an MSA-compliant port. These must be used in pairs, with a CL-SFP module installed at both ends of the connection, or a CopperLine unit installed at one end.
Dokumente
*Die oben genannten Produktdaten werden von Icecat zur Verfügung gestellt. EET ist nicht verantwortlich für eventuelle Fehler in diesem Zusammenhang.