MPN KVR26N19S6/4
EAN/UPC 740617282733
Lagernivå
ValueRAM's KVR26N19S6/4 is a 512M x 64-bit (4GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers.
Power Supply: VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP = 2.5V Typical
VDDSPD = 2.2V to 3.6V
Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
Low-power auto self refresh (LPASR)
Data bus inversion (DBI) for data bus
On-die VREFDQ generation and calibration
Single-rank
On-board I2 serial presence-detect (SPD) EEPROM
Unregistered (unbuffered)
19
PC/Server
No
Yes
4 GB
DDR4
Yes
Gold
Yes
Yes
2666 MHz
288-pin DIMM
1 x 4 GB
1
1.2
512M x 64
1,2 V
350 Nanosecond
Yes
32 Nanosecond
45,75 Nanosecond
Yes
84733020
0 - 85 °C
-55 - 100 °C
84733020
14,8 cm
0,6 kg
0,8 cm
4,6 cm
0,027 kg
1,3 cm
3,13 cm
13,33 cm
Halogen
RoHS
Halogen
RoHS
1 År
ValueRAM's KVR26N19S6/4 is a 512M x 64-bit (4GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers.
*Produktdatan ovan tillhandahålls av Icecat. EET kan inte hållas ansvarigt för fel i samband med detta.