MPN FVT-2201
EAN/UPC 4015867185155
Lagernivå
The FVT-2201 SMF SC media converter is able to convert network signals between copper and fiber-optic based networks. The converter provides a 10/100Base-TX RJ-45 port, supports full duplex and half duplex switch connectivity and 10Base-T and 100Base-TX auto-sensing. Used in single-mode with fibre-optic cabling, this can extend a network range up to 20km.
The device features built-in Dip switches for easy converter configuration, which function on the Smart LFP (Link Fault Pass-through), ...
FCC, CE
No
Activity/Link/Power
Black
Yes
85176990
Yes
Yes
100Base-TX/10Base-T
100Base-FX
Full/Half
Fast Ethernet
10/100 Mbit/s
Yes
Yes
Yes
100 Mbit/s
IEEE 802.3/IEEE 802.3u/IEEE 802.3x
Yes
5 - 90 %
-40 - 75 °C
-10 - 55 °C
12,5 cm
0,3 kg
5,5 cm
23,5 cm
Yes
Yes
10/125/8.3/125/9/125 µm
Single-mode
20000 m
1310 nm
Wired
1
SC
1
1 A
5 V
0,29 kg
7 cm
2,5 cm
9,4 cm
85176990
RoHS
1 År
The FVT-2201 SMF SC media converter is able to convert network signals between copper and fiber-optic based networks. The converter provides a 10/100Base-TX RJ-45 port, supports full duplex and half duplex switch connectivity and 10Base-T and 100Base-TX auto-sensing. Used in single-mode with fibre-optic cabling, this can extend a network range up to 20km.
The device features built-in Dip switches for easy converter configuration, which function on the Smart LFP (Link Fault Pass-through), allowing the converter to monitor both the fiber and copper ports for signal loss, as well as converter transmission method, auto-negotiation mode for adjusting copper speed and full & half duplex mode.
The FVT-2201 is able to operate in temperatures from -10° up to 55° Celsius. The converter can be used as a standalone unit or as a slide-in module to the CHV-2000 19-inch Converter Chassis, which can accommodate up to 14 units for use in a central wiring closet.
*Produktdatan ovan tillhandahålls av Icecat. EET kan inte hållas ansvarigt för fel i samband med detta.