- Hem
- Övervakning & Säkerhet
- Accesskontroll
- Läsare
- Accesskontroll
- 2N 125 kHz, IP54, IK08, PoE, 12 V/1 A DC, 802.3af, 10/100BASE-TX, 97dBA – 9160341
2N 125 kHz, IP54, IK08, PoE, 12 V/1 A DC, 802.3af, 10/100BASE-TX, 97dBA
2N 125 kHz, IP54, IK08, PoE, 12 V/1 A DC, 802.3af, 10/100BASE-TX, 97dBA
MPN 9160341
Artikelnr. W126079191
Lagernivå
Do you have a project for modernising a house, including the access control? Do you want to remove the old controllers, simplify administration and at the same time allow residents to keep their old cards? Select our RFID reader for cards on a frequency of 125 kHz. You only need a UTP cable to connect it to the network and power supply. Forget about connecting with the controller. The unit is a smart device in its own right.
Specifikationer för 9160341
Display
Built-in display
No
Operational conditions
Operating relative humidity (H-H)
10 - 95 %
Operating temperature (T-T)
-40 - 60 °C
Storage temperature (T-T)
-40 - 70 °C
Package dimensions
Depth (package,cm)
3,1 cm
Gross Weight (Package, kg)
1 kg
Height (package,cm)
13,1 cm
Width (package,cm)
11 cm
Power
DC current (max)
1 A
DC voltage range
8 - 12 V
Power consumption
600 mA
Power over Ethernet (PoE)
Yes
Power over Ethernet (PoE) power per port
12,95 Watt
Product dimensions
Net Weight (Product, kg)
0,8 kg
Product Depth
2,8 cm
Product Height
13 cm
Product Width
10,7 cm
Technical details
Access chip/card reader
Yes
Authentication type
Access chip/card
Buzzer
Yes
International Protection (IP) code
IP54
Product colour
Black
RFID frequency
0,125 MHz
Supported protocols
DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog
Type
Basic access control reader
Vendor information
Brand Name
Warranty
3 År
Beskrivning
125 kHz, IP54, IK08, PoE, 12 V/1 A DC, 802.3af, 10/100BASE-TX, 97dBA
Do you have a project for modernising a house, including the access control? Do you want to remove the old controllers, simplify administration and at the same time allow residents to keep their old cards? Select our RFID reader for cards on a frequency of 125 kHz. You only need a UTP cable to connect it to the network and power supply. Forget about connecting with the controller. The unit is a smart device in its own right.
Dokument
*Produktdatan ovan tillhandahålls av Icecat. EET kan inte hållas ansvarigt för fel i samband med detta.