MPN 26-708-50
Artikelnr. W126322630
Lagernivå
Extron MLC IR/RS-232 cable is used to send IR and RS-232 commands to a projector or display from an MediaLink® or IP Link® control system. One end of the MLC IR/RS-232 interconnect cable features a 9-pin D Female for RS-232 control and a 20 AWG pigtail for use with an IR Emitter. The other end has unterminated dual 20 AWG shielded twisted pairs with two drain wires for simple termination to captive screw connectors. This time-saving and cost-effective cable assembly is available in a pre-cut len...
Läs hela beskrivningenUsed to send IR and serial RS‑232 commands to a projector or display from a MediaLink® or IP Link® control system
Unterminated, dual 20 AWG shielded twisted pairs with drain wires for captive screw connectors to a 9-pin D female for RS‑232 projector or display control and a 20 AWG pigtail for use with an IR Emitter
Plenum, NEC CMP‑rated cable
20
15,2 m
DB-9
Straight
Female
Blue
84733080
1 pc(s)
Extron MLC IR/RS-232 cable is used to send IR and RS-232 commands to a projector or display from an MediaLink® or IP Link® control system. One end of the MLC IR/RS-232 interconnect cable features a 9-pin D Female for RS-232 control and a 20 AWG pigtail for use with an IR Emitter. The other end has unterminated dual 20 AWG shielded twisted pairs with two drain wires for simple termination to captive screw connectors. This time-saving and cost-effective cable assembly is available in a pre-cut length of 50' (15.2 m).
By using Extron integration-ready cables, professional AV system integrators save both the time and expense of a skilled in-field technician normally needed to solder or terminate cables. These integration-friendly, plenum-rated cables are manufactured using Extron quality bulk cables and fully machined or durable molded connectors.
*Produktdatan ovan tillhandahålls av Icecat. EET kan inte hållas ansvarigt för fel i samband med detta.