- Acasă
- Piese pentru Servere, Computere și Imprimante
- Servere & Computere
- Componente
- Controlere RAID
- Fujitsu RAID Controller SAS 12Gbit/s 2GB cache based – S26361-F5243-L14
Fujitsu RAID Controller SAS 12Gbit/s 2GB cache based
Fujitsu RAID Controller SAS 12Gbit/s 2GB cache based
MPN S26361-F5243-L14
Articol nr. W126475878
Starea stocului
The RAID concept (Redundant Array of Independent Disks) refers to several independent hard disks which form a large logical drive when switched together. Redundancy information is calculated from several data blocks (except for RAID 0) and saved distributed to the individual hard disks. Your operating system no longer accesses the individual hard disks, but the array.
The actual objective of the RAID concept is to increase availability and prevent downtimes in the event of a hard disk failure...
12Gbit/s SAS ports PCI Express 3.0 x8
Connect up to 240 HDDs and SSDs
LSISAS3108 12Gbit/s RAID-on-Chip
RAID levels 0, 1, 5 and 6 for more data security
1GB / 2GB 1333MHz DDRIII cache memory
RAID spans 10, 50 and 60 for more data security
Optional Flash Backup Unit (FBU)
Optional SafeStore for PRAID EP420i for HDD encryption
For new Systems, versions with enhanced heatsink is available:
E/L11, E/L12, E/L14
Specificații pentru S26361-F5243-L14
Package dimensions
Gross Weight (Package, kg)
0,5 kg
Performance
Chipset
LSI SAS3108
Data transfer rate
12 Gbit/s
Internal memory
2048 Mega bites
Online Capacity Expansion
Yes
RAID Level Migration
Yes
RAID levels
0, 1, 5, 6, 10, 50, 60
S.M.A.R.T. support
Yes
Ports & interfaces
Host interface
PCI Express
PCI Express slots version
3.0
Supported storage drive interfaces
SAS
Product dimensions
Net Weight (Product, kg)
0,44 kg
Product Depth
24 cm
Product Height
19 cm
Product Width
22 cm
Vendor information
Brand Name
Warranty
1 An(i)
Descriere
RAID Controller SAS 12Gbit/s 2GB cache based
The RAID concept (Redundant Array of Independent Disks) refers to several independent hard disks which form a large logical drive when switched together. Redundancy information is calculated from several data blocks (except for RAID 0) and saved distributed to the individual hard disks. Your operating system no longer accesses the individual hard disks, but the array.
The actual objective of the RAID concept is to increase availability and prevent downtimes in the event of a hard disk failure. However, the theoretical security of the RAID concept is only as good as the RAID controller used. Benefit from the Fujitsu RAID controllers where technology, experience and practical implementation all ensure the security that your company needs in the event of an emergency.
Documente
*Datele despre produsul de mai sus sunt furnizate de Icecat. EET nu poate fi făcut responsabil pentru erori în legătură cu aceasta.