MPN ACALP00027A
Articol nr. W128261627
Starea stocului
Improved Cooling Performance
by New Production Process
The high thermal conductivity of aluminum is fully retained by a new type of extrusion. This new production process creates a powerful yet very compact radial heat sink. The particularly thin cooling fins of the new Alpine are fanned out in a Y-shape. This increases the surface area of the heat sink and therefore the cooling capacity.
Lower Power Consumption & Minimum Vibration
The new Alpi...
Improved cooling performance by new production process
0 dB mode: silent passive mode when PWM is below 5 %
Lower power consumption and less vibrations with new motor technology
Extended life span thanks to low coil temperature
Pre-applied MX-2 thermal paste
Easy and tool-free installation
Aluminium
1 ventilator(ventilatoare)
Black, Silver
84733080
7,8 cm
0,35 kg
9,6 cm
9,6 cm
Box
Fluid Dynamic Bearing (FDB)
9,2 cm
0,3 son
Yes
2000 RPM
100 RPM
Processor
LGA 1150 (Socket H3), LGA 1151 (Socket H4), LGA 1155 (Socket H2), LGA 1156 (Socket H)
Air cooler
0,72 Watt
0,06 A
95 Watt
12 V
0,27 kg
9,5 cm
7,7 cm
9,5 cm
1 An(i)
Improved Cooling Performance
by New Production Process
The high thermal conductivity of aluminum is fully retained by a new type of extrusion. This new production process creates a powerful yet very compact radial heat sink. The particularly thin cooling fins of the new Alpine are fanned out in a Y-shape. This increases the surface area of the heat sink and therefore the cooling capacity.
Lower Power Consumption & Minimum Vibration
The new Alpine 12 is powered by an updated motor and runs much more efficiently than its predecessors. Due to sinus-magnetizing the new motor creates just 5 % of the vibrations from commutation of a regular DC-motor. These factors contribute towards saving energy, lowering the coil temperature and reducing vibrations to a minimum without compromising performance.
Extended Life Span
A 10 °C lower motor temperature roughly doubles the life span of a fan.
The new ARCTIC motor has a four times longer service life through its low coil temperature.
High Quality Bearing
Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.
Pre-applied MX-2 Thermal Paste
The pre-applied, high-performance MX-2 thermal compound ensures fast and clean installation.
Easy and Tool-free Installation
Thanks to the push pins, the installation is really easy. Additional tools are not needed to install the cooler.
*Datele despre produsul de mai sus sunt furnizate de Icecat. EET nu poate fi făcut responsabil pentru erori în legătură cu aceasta.