MPN FVT-2002
EAN/UPC 846359031384
Voorraadniveau
The FVT-2002 MMF ST media converter is able to convert network signals between copper and fiber-optic based networks. The converter provides a 10/100Base-TX RJ-45 port, supports full duplex and half duplex switch connectivity and 10Base-T and 100Base-TX auto-sensing. Used in multi-mode with fibre-optic cabling, this can extend a network range up to 2 km.
The device features built-in Dip switches for easy converter configuration, which function on the Smart LFP (Link Fault Pass-through), a...
FCC, CE
No
Activity/Link
Black
Yes
85176990
Yes
Yes
100Base-TX/10Base-T
100Base-FX
Full/Half
Fast Ethernet
10/100 Mbit/s
Yes
Yes
Yes
100 Mbit/s
IEEE 802.3/IEEE 802.3u/IEEE 802.3x
Yes
5 - 90 procent
-40 - 75 °C
-10 - 55 °C
12,5 cm
0,494 kg
5,5 cm
23,5 cm
Yes
Yes
50/125/62.5/125 µm
2000 m
1310 nm
Wired
Yes
1
ST
1
1 A
5 V
0,42 kg
7 cm
2,5 cm
9,4 cm
85176990
RoHS
1 Ja(a)r(en)
The FVT-2002 MMF ST media converter is able to convert network signals between copper and fiber-optic based networks. The converter provides a 10/100Base-TX RJ-45 port, supports full duplex and half duplex switch connectivity and 10Base-T and 100Base-TX auto-sensing. Used in multi-mode with fibre-optic cabling, this can extend a network range up to 2 km.
The device features built-in Dip switches for easy converter configuration, which function on the Smart LFP (Link Fault Pass-through), allowing the converter to monitor both the fiber and copper ports for signal loss, as well as converter transmission method, auto-negotiation mode for adjusting copper speed and full & half duplex mode.
The FVT-2002 is able to operate in temperatures from -10° up to 55° Celsius. The converter can be used as a standalone unit or as a slide-in module to the CHV-2000 19” Converter Chassis, which can accommodate up to 14 units for use in a central wiring closet.
*Bovenstaande productgegevens zijn aangeleverd door Icecat. EET kan hiervoor niet aansprakelijk gehouden worden.