- Pagrindinis puslapis
- Serverių, kompiuterių ir spausdintuvų dalys
- Serveriai ir kompiuteriai
- UPS ir priedai
- UPS
- APC Uninterruptible Power Supply (Ups) 500 Kva 500000 W – SY500K500DR-PD
APC Uninterruptible Power Supply (Ups) 500 Kva 500000 W
APC Uninterruptible Power Supply (Ups) 500 Kva 500000 W
MPN SY500K500DR-PD
Prekės nr. W128432121
Atsargų lygis
InfraStruXure Central compatible
Enables centralized management via APC InfraStruXure® Central.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Modular design
Increases adaptability with an open architecture configurable to any IT environment.
Modular design
Modular construction - can be deployed as a non-standby and migrate to a standby (UPS) system.
Dual mains input
In...
Specifikacijos SY500K500DR-PD
Battery
Battery recharge time
3,5 Hour
Design
Certification
cUL Listed,CE,EN/IEC 62040-2,EN/IEC 62040-3,EN/IEC 62040-1-1,UL 1778,UL 60950-1,UL Listed
Product colour
Black
Features
Audible alarm(s)
Yes
Emergency Power Off (EPO)
Yes
Input frequency
40/70 Hz
Output power
500000 Watt
Output power capacity
500 kVA
Operational conditions
Non-operating altitude
0 - 15000 m
Operating altitude
0 - 999.9 m
Operating relative humidity (H-H)
0 - 95 %
Operating temperature (T-T)
0 - 40 °C
Storage relative humidity (H-H)
0 - 95 %
Storage temperature (T-T)
-15 - 40 °C
Other features
Battery type
VRLA
Dimensions (WxDxH)
5200 x 1070 x 1991 mm
Input connection type
Hard Wire 4-wire (3PH + G), Hard Wire 5-wire (3PH + N + G)
Output connections
1x Hard Wire 4-wire (3PH + G) 1x Hard Wire 5-wire (3PH + N + G)
Package dimensions (WxDxH)
7100 x 1270 x 2150 mm
Package dimensions
Gross Weight (Package, kg)
5,2 kg
Product dimensions
Net Weight (Product, kg)
4 kg
Vendor information
Brand Name
Warranty
1 Metai
Aprašymas
InfraStruXure Central compatible
Enables centralized management via APC InfraStruXure® Central.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance
Modular design
Increases adaptability with an open architecture configurable to any IT environment.
Modular design
Modular construction - can be deployed as a non-standby and migrate to a standby (UPS) system.
Dual mains input
Increases availability by allowing the UPS to be connected to two separate power sources.
SmartSlot
Customize UPS capabilities with management cards.
Hot-swappable intelligence modules
Ensures clean, uninterrupted power to protected equipment during Intelligence Module replacement.
Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Configurable for N+1 internal redundancy
Provides high availabilty through redundancy by allowing configuration with one more Power Module than is necessary to support the connected load.
Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Battery modules connected in parallel
Delivers higher availability through redundant batteries.
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS overload condition or fault.
Audible alarms
Provides notification of changing utility power and UPS conditions.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Scalable runtime
Allows additional run time to be quickly added as needed.
Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.
Scalable power capacity
Reduces UPS over-sizing costs today by allowing quick upgrades later.
*Aukščiau pateiktus gaminio duomenis pateikia „Icecat“. EET negali būti atsakinga už klaidas, susijusias su tuo.