- Home
- Sorveglianza e Sicurezza
- Infrastruttura
- Rete cablata
- Network Transceiver / moduli SFP / GBIC
- ComNet 10 Mbit/s, SFP, 3.3V, 14x74.1x12.4mm, 30g, Grey – CL-SFP1
ComNet 10 Mbit/s, SFP, 3.3V, 14x74.1x12.4mm, 30g, Grey
ComNet 10 Mbit/s, SFP, 3.3V, 14x74.1x12.4mm, 30g, Grey
MPN CL-SFP1
Livello stock
Small Form-Factor Pluggable Copper Range Extender Module
The ComNet CopperLine CL-SFP is a small form-factor pluggable Ethernet extender module that improves bandwidth and distance of existing copper networks. It helps avoid installation costs of new fiber lines on site by allowing full 10 Mbps or 100 Mbps Ethernet bandwidth to be extended over 2-wire twisted pair or coaxial cable. Housed in a small form-factor pluggable (SFP) module enclosure, it is designed for plug-and-play inst...
Specifiche per CL-SFP1
Features
Certification
FCC, CE, UL
Product colour
Grey
RoHS compliance
Yes
Operational conditions
Operating relative humidity (H-H)
0 - 90 %
Operating temperature (T-T)
-40 - 75 °C
Storage temperature (T-T)
-40 - 85 °C
Package dimensions
Depth (package,cm)
2 cm
Gross Weight (Package, kg)
0,02 kg
Height (package,cm)
10 cm
Width (package,cm)
7 cm
Performance
Interface type
SFP
Maximum data transfer rate
10 Mbit/s
SFP transceiver type
Copper
Power
Maximum voltage
3,3 V
Power consumption (typical)
1 Watt
Product dimensions
Net Weight (Product, kg)
0,01 kg
Product Depth
7,41 cm
Product Height
1,24 cm
Product Width
1,4 cm
Technical details
Sustainability certificates
RoHS
Vendor information
Brand Name
Warranty
2 Anno(i)
Descrizione
10 Mbit/s, SFP, 3.3V, 14x74.1x12.4mm, 30g, Grey
Small Form-Factor Pluggable Copper Range Extender Module
The ComNet CopperLine CL-SFP is a small form-factor pluggable Ethernet extender module that improves bandwidth and distance of existing copper networks. It helps avoid installation costs of new fiber lines on site by allowing full 10 Mbps or 100 Mbps Ethernet bandwidth to be extended over 2-wire twisted pair or coaxial cable. Housed in a small form-factor pluggable (SFP) module enclosure, it is designed for plug-and-play installation into any 100BASE-FX Ethernet unit with an MSA-compliant port. These must be used in pairs, with a CL-SFP module installed at both ends of the connection, or a CopperLine unit installed at one end.
Documenti
*Le informazioni del prodotto sopra riportate sono fornite da Icecat. EET non può essere ritenuta responsabile di errori in relazione a ciò..