MPN LT-L802GBTME
EAN/UPC 5704174652717
Stanje zaliha
The robust LT-802GBTME is a high quality switch for the implementation of powerful 10, 100 and 1000Mbit Ethernet ring network structures according to IEEE802.x. This device was developed especially for the industrial environment. The switch allows the construction of a fault-tolerant fiber optic ring via two connections. In the event of an interruption, the ring closes automatically in less than 50ms. This increases the reliability of the system. Two SFP bays for 100/1000BaseSX/LX/ZX are availab...
Pročitajte cijeli opisDIN rail mounting
Copper ports: 8 x 10/100/1000Tx, RJ45
Fiber optic ports: 2 x 100/1000 Mbit/s SFP
Layer 3 static routing
Managed, redundant ring possible
Power voltage 12-48VDC, redundant
8000 unosi
20 Gbit/s
Yes
Black
Yes
Yes
L3
Managed
Yes
Yes
Yes
Yes
IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
64
Yes
Port-based VLAN, Tagged VLAN
Yes
-40 - 75 °C
23,5 cm
1,17 kg
8,9 cm
17,8 cm
8
Gigabit Ethernet (10/100/1000)
RS-232
2
12 - 48 V
15 Watt
9,9 cm
14,2 cm
0,996 kg
5,6 cm
IPv6 Telnet
RADIUS
SNMP, SNMPv2, SNMPv3, SSH
Yes
The robust LT-802GBTME is a high quality switch for the implementation of powerful 10, 100 and 1000Mbit Ethernet ring network structures according to IEEE802.x. This device was developed especially for the industrial environment. The switch allows the construction of a fault-tolerant fiber optic ring via two connections. In the event of an interruption, the ring closes automatically in less than 50ms. This increases the reliability of the system. Two SFP bays for 100/1000BaseSX/LX/ZX are available for the backbone, which can be equipped either for multimode or singlemode fibers.
The switch can also be used as a stand-alone device, for point-to-point connections or as connection modules. The extensive possibilities of the management software also allow the use of the switch in systems with high demands on the functionality of the network. Installation is very quick and easy thanks to the mounting device for DIN rails. The electrical and optical connections are ensured by standardized plugs (RJ45 or LC).
*Gore navedene podatke o proizvodu pruža Icecat. EET se ne može smatrati odgovornim za pogreške u vezi s tim.