MPN VI-UTP-2516A
Niveau de stock
The VI-UTP25xxA series includes PoE midspans with integrated extenders. It supports PoE according to IEEE802.3at and IEEE802.3af, as well as PoE++. From the midspan extender, IP and PoE signals can be transmitted over long distances via twisted pair cables such as Cat5e, Cat6, telephony cable (Cat3) or bell wire. The Midspans are designed in such a way that each port can be assigned the maximum power according to the standards mentioned if necessary. Each port is continuously monitored. This all...
Lire la description complèteIP/PoE extender for UTP cable
Distances up to 500m
PoE 802.1af, at and bt
Redundant power supply possible
-10 - 50 °C
32
1
1U
Noir
Oui
1 pièce(s)
Oui
84 cm
6,48 kg
11,7 cm
40 cm
4,4 cm
5,44 kg
30,5 cm
44,2 cm
Oui
230 V
500 m
10/100 Mbit/s
Complète
100 Mbit/s
Émetteur réseau
Cat5e/Cat6/Cat7
IEEE 802.3/IEEE 802.3af/IEEE 802.3at/IEEE 802.3u
10/100Base-T(X)
The VI-UTP25xxA series includes PoE midspans with integrated extenders. It supports PoE according to IEEE802.3at and IEEE802.3af, as well as PoE++. From the midspan extender, IP and PoE signals can be transmitted over long distances via twisted pair cables such as Cat5e, Cat6, telephony cable (Cat3) or bell wire. The Midspans are designed in such a way that each port can be assigned the maximum power according to the standards mentioned if necessary. Each port is continuously monitored. This allows dynamic power requirements to be recorded and met. At the same time, line or terminal device malfunctions are protected. Although the VI-UTP-25xxA is delivered ready for operation without any settings, the simple graphical user interface allows the setup of the device and each individual port.
*Les données produit ci-dessus sont fournies par Icecat. A cet égard, EET ne peut être tenu responsable des erreurs.