MPN TPE-113GI
EAN / UPC 710931505146
Niveau de stock
The Gigabit Power over Ethernet Injector, model TPE-113GI, combines electrical power with a Gigabit network connection to produce a Gigabit Power over Ethernet (PoE) signal.
Connect this device to a non-PoE switch and then run an Ethernet cable for up to 100 meters (328 Ft.) to network PoE devices.
No need to buy a PoE switch—use an existing open port from a non-PoE switch to save installation and equipment costs when installing TRENDnet PoE access points and IP cameras in remote locatio...
Full Duplex Gigabit speeds Supplies PoE (15.4W) Network a PoE device located up to 100 meters (328 ft.) away Converts a non-PoE Gigabit port to a PoE Gigabit port Save on installation and equipment costs IEEE 802.3af compliant
CE, FCC
Énergie
32 - 122 °F
0 - 50 °C
-20 - 60 °C
2
85044090
85044095
9,7 cm
0,242 kg
5,9 cm
18,6 cm
70 x 45 x 25 mm
0,15 kg
48 V
15,4 Watt
50/60 Hz
100 - 240 V
IEEE 802.3, IEEE802.3u, IEEE 802.3ab, IEEE 802.3af
Oui
10/100/1000 Mbit/s
10Base-T, 100Base-TX
Gigabit Ethernet
The Gigabit Power over Ethernet Injector, model TPE-113GI, combines electrical power with a Gigabit network connection to produce a Gigabit Power over Ethernet (PoE) signal.
Connect this device to a non-PoE switch and then run an Ethernet cable for up to 100 meters (328 Ft.) to network PoE devices.
No need to buy a PoE switch—use an existing open port from a non-PoE switch to save installation and equipment costs when installing TRENDnet PoE access points and IP cameras in remote locations. This compact device safeguards valuable network equipment with short circuit protection. Quickly create an integrated PoE and non-PoE network at Gigabit speeds.
*Les données produit ci-dessus sont fournies par Icecat. A cet égard, EET ne peut être tenu responsable des erreurs.