MPN MHX2CW000A
Niveau de stock
These explosion-proof housings for the MAXIMUS range have been certified and designed to meet the strictest standards regarding installation in potentially explosive environments, i.e. where there is the presence of gas and flammable dusts.
The MAXIMUS range ensures excellent performance for monitoring critical processes in areas that carry a risk of explosion, such as refineries, gas pipelines, oil tankers, offshore platforms, industrial processes, chemical industries, etc.
Equipped with ...
Made of AISI 316L electropolished stainless steel
2 threaded holes ¾” NPT for use of cable glands or conduit
Integrated telemetry receiver for version with wiper
Ambient temperature: from -40°C (-40°F) up to +60°C (140°F)
: EN60950-1, IEC60950-1, EN60950-22, ICE60950-22, EN50130-5, EN60068-2-6, EN61000-6-4,EN61000-3-2,EN61000-3-3,EN50130- 4,EN55032(Class A), EN50581, : EN60950-22, ICE60950-22, IP66, IP67, EN50130-5, EN60068-2-6
IP66
Videotec
Acier inoxydable
Anti-explosion
Universel
Stainless steel
1
Housing
5 - 95 %
-40 - 60 °C
2 entrées
2 outputs
Avec fil
CE, RoHS
3/4 "
Oui
2
1 pièce(s)
22 cm
19 kg
34 cm
58 cm
15 cm
16,5 cm
8 cm
8,2 cm
24,5 cm
42,2 cm
16,5 cm
16,5 kg
34 cm
2200 mA
50 - 60 Hz
53 Watt
24 V
2 Année (s)
These explosion-proof housings for the MAXIMUS range have been certified and designed to meet the strictest standards regarding installation in potentially explosive environments, i.e. where there is the presence of gas and flammable dusts.
The MAXIMUS range ensures excellent performance for monitoring critical processes in areas that carry a risk of explosion, such as refineries, gas pipelines, oil tankers, offshore platforms, industrial processes, chemical industries, etc.
Equipped with heating, the housing has the same installation and operating temperatures, of between -40° C and + 60° (-40°F / +140°F).
In the version with wiper, MHX is equipped with an integrated telemetry receiver that allows, through the RS485 serial interface, to receive data from the remote control for the activation of the wiper / washer and for switching an eventual external illuminator.
The wiring is made easier thanks to the removable connectors on the circuit board.
The control board, with removable connectors, is also equipped with an input for the wiper activation through a dry contact.
The housing can eventually be controlled by VMS through a video encoder with RS485 serial port.
*Les données produit ci-dessus sont fournies par Icecat. A cet égard, EET ne peut être tenu responsable des erreurs.