- Accueil
- Réseau
- Réseau filaire
- Switch réseau
- Composants switch réseau
- Hewlett Packard Enterprise HP HSR6804 Router Opacity Shield Kit – JG676A
Hewlett Packard Enterprise HP HSR6804 Router Opacity Shield Kit
Hewlett Packard Enterprise HP HSR6804 Router Opacity Shield Kit
MPN JG676A
Niveau de stock
Preparing for installation
- The installation procedures must be performed by qualified personnel.
- Before installation, read the compliance and safety manual for the compatible device of the FIPS opacity shield kit.
- Wear an ESD wrist strap, and make sure the wrist strap makes good skin contact and is reliably grounded.
- Make sure the operating temperature is not higher than 40°C (104°F).
- Ensure enough clearance for installation.
- Face the front of the chassis...
Caractéristiques JG676A
Caractéristiques
Couleur du produit
Noir
Conditions environnementales
Température d'opération
0 - 40 °C
Package dimensions
Gross Weight (Package, kg)
1 kg
Product dimensions
Net Weight (Product, kg)
0,9 kg
représentation / réalisation
Compatibilité
HP HSR6804
Vendor information
Brand Name
Warranty
1 Année (s)
Description
HP HSR6804 Router Opacity Shield Kit
Preparing for installation
- The installation procedures must be performed by qualified personnel.
- Before installation, read the compliance and safety manual for the compatible device of the FIPS opacity shield kit.
- Wear an ESD wrist strap, and make sure the wrist strap makes good skin contact and is reliably grounded.
- Make sure the operating temperature is not higher than 40°C (104°F).
- Ensure enough clearance for installation.
- Face the front of the chassis to locate the installation positions (left and right).
- If the device has been mounted in a rack, remove it from the rack
Installing the opacity shield
Only use the screws and hex bolts that are supplied in the opacity shield kit to secure the opacity shield.
*Les données produit ci-dessus sont fournies par Icecat. A cet égard, EET ne peut être tenu responsable des erreurs.