MPN IMC-470-SFP
Réf. W128157022
Niveau de stock
Introduction
The IMC-450 and 470 series are standalone media converters with an optional internal power security device that makes the connection between copper and fiber cables. They can
be installed anywhere a network connection is required. In addition, these media converters feature automatic link restoration. They increase the scalability of a network by providing
rate conversion, distance extension, and multiple types of fixed fiber connectors or open slots for small for...
Designed with internal AC power
Supports diagnostic features including Link Loss and Fiber Alert
Some models provide two 10/100/1000Mbps copper ports
Some models support Link Fault Pass Through (LFPT)
Supports a variety of SFP modules
Supports multiple mounting options (desktop, DIN rail or wall-mount)
0 - 3048 m
5 - 95 %
-10 - 50 °C
-35 - 75 °C
2
Oui
Diagnostic
85176990
85176990
0,55 kg
2 cm
0,54 kg
10,1 cm
10,1 cm
7 Watt
1 A
50 - 60 Hz
110 - 240 V
Oui
1000Base-LX, 1000Base-SX, 1000Base-T
1000 Mbit/s
Oui
IEEE 802.3ab
2 Année (s)
Introduction
The IMC-450 and 470 series are standalone media converters with an optional internal power security device that makes the connection between copper and fiber cables. They can
be installed anywhere a network connection is required. In addition, these media converters feature automatic link restoration. They increase the scalability of a network by providing
rate conversion, distance extension, and multiple types of fixed fiber connectors or open slots for small form-factor pluggable (SFP) connections.
The IMC-450 and 470 support troubleshooting features such as Link Loss and Fiber Alert which can be enabled/disabled by DIP switches. The diagnostic features allow the network
administrator to quickly identify network faults. The IMC-470 series provides two 10/100/1000Mbps copper UTP ports and one fiber port. They are available in an SFP form factor,
as well as for fixed-fiber in single-mode and multi-mode. Link Fault Pass Through (LFPT) functionality allows network operators to determine a fault condition on the interface.
*Les données produit ci-dessus sont fournies par Icecat. A cet égard, EET ne peut être tenu responsable des erreurs.