MPN GLB251221
Réf. W126146180
EAN / UPC 5704174477945
Niveau de stock
Quantité limitée
Elite Series PLA Silk is a fully biodegradable polymer with excellent properties that ensures a highly efficient printing with an extremely good adhesion of printed items to the build beds of 3D printers.
Major advantages of PLA Silk is the very good layer cohesion, reduced layer visibility, excellent surface quality with a beautiful satin shine and low processing shrinkage. It is particularly useful for 3D printers without a closed build chamber and produces consistent and reliable resul...
Environmentally friendly, bio-degradable polymer
Printing temperature: 185-215° C
Bed temperature: 0-45° C
Printing speed: 40-150 mm/s
Universel
46,1 kJ/m²
210 °C
2150 MPa
Oui
180 °C
Blanc
Acide polylactique (PLA)
63 MPa
1260 kPa
4 %
0,05 mm
150 mm/sec
7,5 cm
1,12 kg
20,5 cm
20,5 cm
1,75 mm
7 cm
20 cm
1,05 kg
20 cm
1 Année (s)
Elite Series PLA Silk is a fully biodegradable polymer with excellent properties that ensures a highly efficient printing with an extremely good adhesion of printed items to the build beds of 3D printers.
Major advantages of PLA Silk is the very good layer cohesion, reduced layer visibility, excellent surface quality with a beautiful satin shine and low processing shrinkage. It is particularly useful for 3D printers without a closed build chamber and produces consistent and reliable results.
The biodegradable propterties means that PLA will slowly start to decompose when exposed to UV-radiation and moisture. If dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional plastics where degradation can take up to 500-1,000 years.
*Les données produit ci-dessus sont fournies par Icecat. A cet égard, EET ne peut être tenu responsable des erreurs.