- Accueil
- Surveillance & sécurité
- Infrastructure réseau
- Réseau filaire
- Modules SFP / GBIC
- ComNet 10 Mbit/s, SFP, 3.3V, 14x74.1x12.4mm, 30g, Grey – CL-SFP1
ComNet 10 Mbit/s, SFP, 3.3V, 14x74.1x12.4mm, 30g, Grey
ComNet 10 Mbit/s, SFP, 3.3V, 14x74.1x12.4mm, 30g, Grey
MPN CL-SFP1
Niveau de stock
Small Form-Factor Pluggable Copper Range Extender Module
The ComNet CopperLine CL-SFP is a small form-factor pluggable Ethernet extender module that improves bandwidth and distance of existing copper networks. It helps avoid installation costs of new fiber lines on site by allowing full 10 Mbps or 100 Mbps Ethernet bandwidth to be extended over 2-wire twisted pair or coaxial cable. Housed in a small form-factor pluggable (SFP) module enclosure, it is designed for plug-and-play inst...
Caractéristiques CL-SFP1
Caractéristiques
Certification
FCC, CE, UL
Conformité RoHS
Oui
Product colour
Gris
Détails techniques
Certificats de durabilité
RoHS
Operational conditions
Humidité relative de fonctionnement (H-H)
0 - 90 %
Storage temperature (T-T)
-40 - 85 °C
Température d'opération
-40 - 75 °C
Package dimensions
Depth (package,cm)
2 cm
Gross Weight (Package, kg)
0,02 kg
Height (package,cm)
10 cm
Width (package,cm)
7 cm
Product dimensions
Height (product,cm)
1,24 cm
Net Weight (Product, kg)
0,01 kg
Product Depth
7,41 cm
Product Width
1,4 cm
Puissance
Consommation électrique typique
1 Watt
Tension maximum
3,3 V
représentation / réalisation
Débit de transfert des données maximum
10 Mbit/s
Type d'émetteur-récepteur SFP
Cuivre
Type d'interface
SFP
Vendor information
Brand Name
Warranty
2 Année (s)
Description
10 Mbit/s, SFP, 3.3V, 14x74.1x12.4mm, 30g, Grey
Small Form-Factor Pluggable Copper Range Extender Module
The ComNet CopperLine CL-SFP is a small form-factor pluggable Ethernet extender module that improves bandwidth and distance of existing copper networks. It helps avoid installation costs of new fiber lines on site by allowing full 10 Mbps or 100 Mbps Ethernet bandwidth to be extended over 2-wire twisted pair or coaxial cable. Housed in a small form-factor pluggable (SFP) module enclosure, it is designed for plug-and-play installation into any 100BASE-FX Ethernet unit with an MSA-compliant port. These must be used in pairs, with a CL-SFP module installed at both ends of the connection, or a CopperLine unit installed at one end.
Documents
*Les données produit ci-dessus sont fournies par Icecat. A cet égard, EET ne peut être tenu responsable des erreurs.