MPN 45348
Réf. 45348M
EAN / UPC 5703431453487
OEM EDS-G205A-4POE
Niveau de stock
Features and Benefits
- Full Gigabit Ethernet ports
- IEEE 802.3af/at, PoE+ standards
- Up to 30 watts output per PoE port
- 24/48 VDC flexible redundant power inputs
- Supports 9.6 KB jumbo frames
- Intelligent power consumption detection and classification
- Smart PoE over current and short circuit protection
- 40 to 75°C operating temperature range (T models)
Introduction
The EDS-G205A-4PoE switches are smart, 5-port, unmana...
Full Gigabit Ethernet ports
IEEE 802.3af/at, PoE+ standards
Up to 36 W output per PoE port
12/24/48 VDC redundant power inputs
Supports 9.6 KB jumbo frames
Intelligent power consumption detection and classification
Smart PoE overcurrent and short-circuit protection
-40 to 75°C operating temperature range (-T models)
L2
Non-géré
5 - 95 %
0 - 60 °C
-40 - 85 °C
FCC Part 15 Subpart B Class A, EN 55022 Class A EN 61000-4-2 (ESD), EN 61000-4-3 (RS) EN 61000-4-4 (EFT), EN 61000-4-5 (Surge) EN 61000-4-6 (CS), EN 61000-4-8 EN 50121-4 IEC 60068-2-27 IEC 60068-2-32 IEC 60068-2-6
Noir
Non
UL 508
Oui
Oui
Non
IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
21,5 cm
0,499 kg
7,5 cm
15 cm
Oui
4
5
Gigabit Ethernet (10/100/1000)
10,5 cm
0,399 kg
13,5 cm
2,9 cm
7.5 A
24 V
8000 entrées
2 Année (s)
Features and Benefits
- Full Gigabit Ethernet ports
- IEEE 802.3af/at, PoE+ standards
- Up to 30 watts output per PoE port
- 24/48 VDC flexible redundant power inputs
- Supports 9.6 KB jumbo frames
- Intelligent power consumption detection and classification
- Smart PoE over current and short circuit protection
- 40 to 75°C operating temperature range (T models)
Introduction
The EDS-G205A-4PoE switches are smart, 5-port, unmanaged full Gigabit Ethernet switches supporting Power-over-Ethernet on ports 2 to 5. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-G205A-4PoE switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring, and they support IEEE 802.3/802.3u/802.3x with 10/100/1000M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical high-bandwidth solution for your industrial Ethernet network.
*Les données produit ci-dessus sont fournies par Icecat. A cet égard, EET ne peut être tenu responsable des erreurs.