MPN 25119
Réf. W128456569
EAN / UPC 4002888251198
Niveau de stock
This Lindy Media Converter extends the connection between two network devices at distances up to 550m using multimode fibre optic cables. The installation is plug-and-play and the user only has to connect to the RJ45 port with a Cat.5e or above Ethernet cable and the fibre port with a SC Multimode 50/125 or 62.5/125 Duplex fibre optic cable. No configuration needed, easily integrated into any existing Ethernet network and supports Full/Half duplex mode and auto-negotiation on both ports.
10/100/1000 Base-T copper to 1000 Base-FX fiber
Support SC Multimode fiber optic 50/125 or 62.5/125 cables
Extend fiber distance up to 550m
Support Full/Half duplex mode and auto-negotiation
5 - 95 %
0 - 40 °C
-10 - 70 °C
SC
1
2
Avec fil
CE, UKCA, FCC, RoHS, REACH & California Proposition 65
Noir
Non
Oui
16,5 cm
0,39 kg
4,5 cm
15,5 cm
2,5 cm
0,39 kg
7 cm
9,5 cm
1 A
5 V
50/125/62.5/125 µm
550 m
850 nm
Multimode
10/100/1000 Mbit/s
IEEE 802.3
Complète/Demi
2 Année (s)
This Lindy Media Converter extends the connection between two network devices at distances up to 550m using multimode fibre optic cables. The installation is plug-and-play and the user only has to connect to the RJ45 port with a Cat.5e or above Ethernet cable and the fibre port with a SC Multimode 50/125 or 62.5/125 Duplex fibre optic cable. No configuration needed, easily integrated into any existing Ethernet network and supports Full/Half duplex mode and auto-negotiation on both ports.
The Media Converter can operate with 100 or 1000Mbps network speed, it also provides status LEDs to indicate data link, speed, Full/Half Duplex and link failure. Supports IEEE 802.3 standard and Jumbo frames up to 9K.
*Les données produit ci-dessus sont fournies par Icecat. A cet égard, EET ne peut être tenu responsable des erreurs.