- Accueil
- Pièces pour serveur, notebook & imprimante
- Imprimantes & pièces détachées
- Consommables
- Filaments 3D
- eSTUFF PLA 3D 2.85mm filament Orange 1kg(Gearlab box) – GLB251304
eSTUFF PLA 3D 2.85mm filament Orange 1kg(Gearlab box)
eSTUFF PLA 3D 2.85mm filament Orange 1kg(Gearlab box)
MPN GLB251304
EAN / UPC 5706998988867
Niveau de stock
Quantité limitée
Print in 3D and create prototypes, spare parts, quick and on-demand production, etc. in any shape or geometry.
Gearlab 3D Filaments come in different plastic materials and with varying properties. PLA polylactic acid is a biodegradable polymer derived from non-GMO corn starch. This means that an item made of PLA will slowly start to decompose when exposed to moisture, and if dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional...
Pantone 151
Smoke- and odour-free printing
Enhanced post-print workability
Easy to print filament with stable printing size and low material shrinkage
Environmentally friendly, bio-degradable polymer
Alternatives similaires
Caractéristiques GLB251304
Caractéristiques
Compatibilité de marque
Universel
Couleurs d'impression
Orange
Force de l'impact
0,025 kJ/m²
Instruction de température d'impression
200 °C
Matériau d'impression
Acide polylactique (PLA)
Module de flexion
2300 MPa
Non toxique
Oui
Résistance à la flexion
50 MPa
Résistance à la traction
500 kPa
Rupture à l'allongement
50 %
Température de transition de verre (min)
125 °C
Tolérance du diamètre
0,05 mm
Vitesse d'impression (mesure métrique)
60 mm/sec
Informations sur l'emballage
Quantité
1 pièce(s)
Package dimensions (verified)
Depth Verified
21,2 cm
Gross Weight Verified
1,31 kg
Height Verified
7,5 cm
Width Verified
21,2 cm
Poids et dimensions
Diamètre
2,85 mm
Épaisseur
2,85 mm
Longueur de câble
1280 cm
Product dimensions
Net Weight (Product, kg)
1 kg
Vendor information
Brand Name
Warranty
1 Année (s)
Description
PLA 3D 2.85mm filament Orange 1kg(Gearlab box)
Print in 3D and create prototypes, spare parts, quick and on-demand production, etc. in any shape or geometry.
Gearlab 3D Filaments come in different plastic materials and with varying properties. PLA polylactic acid is a biodegradable polymer derived from non-GMO corn starch. This means that an item made of PLA will slowly start to decompose when exposed to moisture, and if dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional plastics where degradation will take 500-1,000 years.
Although PLA will degrade in an exposed natural environment, it is important to point out that it is very robust when printed and used in any normal application.
With PLA it is easy to print big parts due to its thermal stability. It is stiff, hard, but also more brittle than some other compounds. This means that it may not be the best choice of material if the printed item will be exposed to repeated heavy bumps or sharp impacts.
Documents
*Les données produit ci-dessus sont fournies par Icecat. A cet égard, EET ne peut être tenu responsable des erreurs.