- Inicio
- Piezas de servidor, PC e impresora
- Impresoras
- Consumibles
- Filamentos 3D
- eSTUFF PLA 3D 2.85mm filament Pearl gold 1kg(Gearlab box) – GLB251326
eSTUFF PLA 3D 2.85mm filament Pearl gold 1kg(Gearlab box)
eSTUFF PLA 3D 2.85mm filament Pearl gold 1kg(Gearlab box)
MPN GLB251326
EAN / UPC 5706998989079
Nivel de existencias
Hay una cantidad limitada de este producto.
Print in 3D and create prototypes, spare parts, quick and on-demand production, etc. in any shape or geometry.
Pearl PLA polylactic acid is a biodegradable polymer derived from non-GMO corn starch. This means that an item made of PLA will slowly start to decompose when exposed to moisture, and if dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional plastics where degradation will take 500-1,000 years.
Although PLA will degrade ...
Pantone 871
Environmentally friendly bio-degradable polymer
Enhanced post-print workability
Smoke- and odour-free printing
Pearl effect to give an almost satin metallic finish when polished
Especificaciones de GLB251326
Features
Alargamiento a rotura
50 %
Compatibilidad de marca
Any brand
Guía de temperatura de impresión
200 °C
Impresión de colores
Gold
Material de impresión
Polylactic acid (PLA)
Módulo de flexión
2300 MPa
No tóxico
Yes
Resistencia a la flexión
50 MPa
Resistencia a la tracción
500 kPa
Resistente a impactos
0,025 kJ/m²
Temperatura de transición vítrea (mín.)
125 °C
Tolerancia de diámetro
0,05 mm
Velocidad de impresión
60 mm/s
Package dimensions
Depth (package,cm)
21,3 cm
Gross Weight (Package, kg)
1,31 kg
Height (package,cm)
7,4 cm
Width (package,cm)
21,3 cm
Packaging data
Cantidad por pack
1 pieza(s)
Product dimensions
Net Weight (Product, kg)
1 kg
Vendor information
Brand Name
Warranty
1 Año/s
Weight & dimensions
Diámetro
2,85 mm
Grosor
2,85 mm
Longitud del cable
1280 cm
Descripción
PLA 3D 2.85mm filament Pearl gold 1kg(Gearlab box)
Print in 3D and create prototypes, spare parts, quick and on-demand production, etc. in any shape or geometry.
Pearl PLA polylactic acid is a biodegradable polymer derived from non-GMO corn starch. This means that an item made of PLA will slowly start to decompose when exposed to moisture, and if dropped in the sea it will dissolve completely after six months to two years. Compare this to conventional plastics where degradation will take 500-1,000 years.
Although PLA will degrade in an exposed natural environment, it is important to point out that it is very robust when printed and used in any normal application.
With Pearl PLA it is easy to print big parts due to its thermal stability. While PLA is stiff, hard, and more brittle than other compounds, Pearl PLA is much stronger and offers 8 times higher impact strength than normal PLA.
Pearl PLA 3D Filament is ideal for educational use as part of STE@M learning, as well as for corporate and private concept and rapid prototype modelling.
Documentos
*Los datos de producto anteriores son proporcionados por Icecat. EET no se hace responsable de los errores en relación con esto.