- Home
- Network
- Wired Network
- Bridges & Repeaters
- Barox IP- / PoE-Extender for UTP-cable (twisted pair cable) – VI-UTP-2301A
Barox IP- / PoE-Extender for UTP-cable (twisted pair cable)
Barox IP- / PoE-Extender for UTP-cable (twisted pair cable)
MPN VI-UTP-2301A
EAN/UPC 841144100078
Stock level
The devices of the VI-UTP-2300A series transmit 10/100Mbps Ethernet and PoE/PoE+ with UTP or Cat cable up to a distance of 500m. The Pass Through technology makes it possible to pass on the PoE power supply, e.g. of a midspan, directly via UTP or Cat cable. The devices do not need any software configuration. Diagnostic LEDs provide an overview of the operating status. The modules of the VI-UTP-2300A series can be mounted as desktop models, on DIN rails and in 19" cabinets.
IP/PoE-Extender for UTP-cable
Distances up to 500m
PoE 802.1af and at
No local power supply needed in PoE mode
Specifications for VI-UTP-2301A
Design
Housing material
Aluminium
LED indicators
Y, Yes
Product colour
Black
Network
Cabling technology
10/100Base-T(X)
Networking standards
IEEE 802.3, IEEE 802.3u
Operational conditions
Operating relative humidity (H-H)
0 - 95 %
Operating temperature (T-T)
-40 - 75 °C
Storage temperature (T-T)
-40 - 80 °C
Package dimensions
Depth (package,cm)
16.8 cm
Gross Weight (Package, kg)
0.2 kg
Height (package,cm)
6 cm
Width (package,cm)
8.1 cm
Performance
Cable types supported
Cat5e, Cat6, Cat7
Data transfer rate
100 Mbit/s
Duplex system
Full
Ethernet LAN data rates
10, 100
Maximum transfer distance
500 m
Type
Network transmitter
Ports & interfaces
RJ-45 ports quantity (transmitter)
2
Power
Power consumption (typical)
2 Watt
Product dimensions
Net Weight (Product, kg)
0.117 kg
Product Depth
9.5 cm
Product Height
2.7 cm
Product Width
4 cm
Vendor information
Description
IP- / PoE-Extender for UTP-cable (twisted pair cable)
The devices of the VI-UTP-2300A series transmit 10/100Mbps Ethernet and PoE/PoE+ with UTP or Cat cable up to a distance of 500m. The Pass Through technology makes it possible to pass on the PoE power supply, e.g. of a midspan, directly via UTP or Cat cable. The devices do not need any software configuration. Diagnostic LEDs provide an overview of the operating status. The modules of the VI-UTP-2300A series can be mounted as desktop models, on DIN rails and in 19" cabinets.
*The product data above is provided by Icecat. EET cannot be held responsible for errors in relation to this.