MPN KVR26S19S6/4
EAN/UPC 5704174592570
Stock level
This document describes ValueRAM's KVR26S19S6/4 as a 512M x 64-bit (4GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin SODIMM uses gold contact fingers.
Power Supply: VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP = 2.5V Typical
VDDSPD = 2.2V to 3.6V
Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
Low-power auto self refresh (LPASR)
Data bus inversion (DBI) for data bus
On-die VREFDQ generation and calibration
Single-rank
On-board I2 serial presence-detect (SPD) EEPROM
Unregistered (unbuffered)
19
Laptop
No
Yes
4 GB
DDR4
2666 MHz
260-pin SO-DIMM
1 x 4 GB
1
1.2 V
2.5 V
350 Nanosecond
Yes
32 Nanosecond
45.75 Nanosecond
84733020
0 - 85 °C
-55 - 100 °C
84733020
8.4 cm
0.6 kg
0.8 cm
4.6 cm
0.004 kg
0.25 cm
3 cm
6.96 cm
Halogen
RoHS
Halogen
RoHS
1 Year(s)
This document describes ValueRAM's KVR26S19S6/4 as a 512M x 64-bit (4GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin SODIMM uses gold contact fingers.
*The product data above is provided by Icecat. EET cannot be held responsible for errors in relation to this.