Cisco Cable adapter E1 > RJ-48C 2m

Cisco Cable adapter E1 > RJ-48C 2m

This part is used or refurbished. All accessories may NOT be included.

MPN CAB-ADPT-75-120=-RFB

Item no. W128455561

Stock level

One of the most complicated parts of setting up a network system is the selection of the serial cables to connect the network system to the serial devices in your network. CISCO cables are high performance and high quality. The cables have been tested by Cisco technical experts to ensure they meet the Cisco rigid quality standards.??The 75-120-ohm adapter cable connects Cisco 120-ohm E1 port adapters to 75-ohm unbalanced G.703 E1 lines.

The adapter has an eight-pin RJ-48C connector on th...

Read full description

    Specifications for CAB-ADPT-75-120=-RFB

    Features

    Cable length

    2 m

    Connector 1

    RK-48c

    Connector 1 form factor

    Straight

    Connector 2

    E1

    Connector 2 form factor

    Straight

    Product colour

    Black

    Package dimensions

    Gross Weight (Package, kg)

    0.5 kg

    Product dimensions

    Net Weight (Product, kg)

    0.4 kg

    Vendor information

    Brand Name

    Warranty

    1 Year(s)

    Description

    Cable adapter E1 > RJ-48C 2m

    One of the most complicated parts of setting up a network system is the selection of the serial cables to connect the network system to the serial devices in your network. CISCO cables are high performance and high quality. The cables have been tested by Cisco technical experts to ensure they meet the Cisco rigid quality standards.??The 75-120-ohm adapter cable connects Cisco 120-ohm E1 port adapters to 75-ohm unbalanced G.703 E1 lines.

    The adapter has an eight-pin RJ-48C connector on the 120-ohm side and dual BNC coaxial connectors (transmit and receive) on the 75-ohm side. Two switches on the 120-ohm side allow the outer conductor of the cable (the input port of the E1 port adapter) to be either isolated from or connected to a protected earth ground. The 120-ohm E1 ports of your port adapter connect to the 75-120-ohm adapter cable using RJ-48C connectors and Category 3 or Category 5 shielded foil twisted-pair (FTP) cable with 120-ohm impedance.

    *The product data above is provided by Icecat. EET cannot be held responsible for errors in relation to this.

    EET United Kingdom30 Riverside WayUB8 2YF UxbridgeCompany Reg No. 6353017
    United Kingdom / English