MPN ACFAN00153A
Item no. W128252432
Stock level
Not only that we at ARCTIC free the IT world from noise – we care for the right sound as well!
As an international company, our expertise extends over noise reduction in PCs to consumer electronics products.
Optimised for static pressure
Ideal choice on heatsinks, radiators and (partly-) covered case vents
Push- or pull-configuration possible
3-pin
5
5 fan(s)
Black
71.5 x 71.5 mm
8.6 cm
0.26 kg
8.9 cm
12.7 cm
20
Box
Yes
40.3 m³/hr
Fluid Dynamic Bearing (FDB)
Not supported
8 cm
1.9 mmH2O
23.4 cfm
0.3 sone
3000 RPM
Computer case
Not supported
Fan
0.09 A
12 V
0.2 kg
2.5 cm
8 cm
8 cm
1 Year(s)
0.4 m
Not only that we at ARCTIC free the IT world from noise – we care for the right sound as well!
As an international company, our expertise extends over noise reduction in PCs to consumer electronics products.
During the development of the new P8, special emphasis was placed on a focused airstream and thus a
high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance.
Therefore, the P8 is particularly suitable for use on heatsinks and radiators.
Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.
Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable.
Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor.
Push warm air out of the case
Pull cool air into your cas
*The product data above is provided by Icecat. EET cannot be held responsible for errors in relation to this.