- Home
- Network
- KVM & Console
- Serial Servers
- Moxa Serial Server Rs-232 – NPORT 5410
Moxa Serial Server Rs-232
Moxa Serial Server Rs-232
MPN NPORT 5410
Item no. W128371297
OEM 778469
Stock level
Network Readiness for up to Four Serial Devices
NPort 5400 device servers can conveniently and transparently connect up to four serial devices to an Ethernet network, allowing you to network your existing serial devices with only basic configuration. Data transmission between the serial and Ethernet interfaces is bi-directional. By using NPort device servers, you not only protect your current hardware investment, but also allow for future network expansion. You can both centralize the...
Specifications for NPORT 5410
Design
Housing material
Metal
Product colour
Black/Blue
Safety
UL 60950-1, EN 60950-1
Indication
Link/Act LED
Yes
Operational conditions
Maximum operating altitude
2000 m
Operating relative humidity (H-H)
5 - 95 %
Operating temperature (T-T)
0 - 55 °C
Storage temperature (T-T)
-40 - 75 °C
Package dimensions
Gross Weight (Package, kg)
0.25 kg
Ports & interfaces
Ethernet LAN (RJ-45) ports
1
Power
Input voltage
12 - 48 V
Power consumption
350 mA
Power source type
DC
Product dimensions
Net Weight (Product, kg)
0.19 kg
Protocols
Supported network protocols
ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP, Rtelnet, ARP
Technical details
Auto MDI/MDI-X
Yes
Baud rate
921.6 Kbit/s
Certification
CE, FCC
Data bits
5/6/7/8
Display
LCD
Electrostatic Discharge (ESD) protection
15 kV
Ethernet LAN data rates
10/100 Mbit/s
Flow control support
Yes
Isolation
1.5 kV
Management protocols
SNMP v1
Mean time between failures (MTBF)
205153 Hour
RS-232 signals
CTS/DCD/DSR/DTR/GND/RTS/Rx/Tx
Serial interface type
RS-232
Serial ports quantity
4
Stop bits
1/1.5/2
Vendor information
Brand Name
Warranty
1 Year(s)
Weight & dimensions
Dimensions (WxDxH)
158 x 103 x 33 mm
Description
Network Readiness for up to Four Serial Devices
NPort 5400 device servers can conveniently and transparently connect up to four serial devices to an Ethernet network, allowing you to network your existing serial devices with only basic configuration. Data transmission between the serial and Ethernet interfaces is bi-directional. By using NPort device servers, you not only protect your current hardware investment, but also allow for future network expansion. You can both centralize the management of your serial devices, and distribute management hosts over the network.
Independent Operation Mode for each Serial Port
NPort 5400 device servers can be used to connect different devices for remote data polling or event handling over a TCP/IP network. Each serial port on the NPort 5400 operates independently to provide maximum versatility. For example, port 1 can operate in Driver mode, port 2 in TCP Server mode, and ports 3 and 4 in TCP Client mode.
- Easy IP address configuration with built-in LCD panel
- 10/100M auto-sensing Ethernet
- 4 serial ports, with support for RS-232, RS-422, and RS-485
- Built-in 15 KV ESD surge protection for all serial signals
- Versatile socket operation modes, including TCP Server, TCP Client, and UDP
- Choice of configuration methods: Web console, Telnet console, and Windows utility
- SNMP MIB-II for network management
- 2 KV isolation protection for NPort 5430I/5450I
*The product data above is provided by Icecat. EET cannot be held responsible for errors in relation to this.