MPN DPE-301GS
EAN/UPC 790069416675
Stock level
The DPE-301GS PoE splitter is used with end devices such as wireless access points, IP cameras and VoIP phones that don’t natively support PoE, but rather require DC power input of 5V, 9V or 12V. It receives PoE power on a network cable from a PoE switch or midspan injector, and splits the Ethernet and DC power into two separate cables. One cable provides the DC power, and the other cable provides the Ethernet signal. Users can select from 5VDC, 9VDC and 12VDC power for their device using a sele...
Read full descriptionSimplicity
Plug-and-Play, so no software required
Reduces installation and network equipment costs by removing the need for electrical wiring
Provides power over existing network cabling when paired with a Power Source Equipment (such as the DPE-301GI) to a non-PoE device
Flexible Power Options
Separates a PoE Ethernet cable into DC power and a standard Ethernet cable
Supports 5 V, 9 V, and 12 V output voltages
Transforms incoming AC power to low-voltage DC power Gigabit Connectivity
Receives power up to 100 metres away
Connect your devices at Gigabit speeds
CE, FCC, VCCI, RCM
White
No
85044095
30 pc(s)
30 pc(s)
120 cm
327.8 kg
327.8 kg
110 cm
176.5 cm
176.5 cm
1200 pc(s)
1200 pc(s)
40 pc(s)
10.26 kg
10.26 kg
32.5 cm
44.5 cm
9.2 kg
33.2 cm
Fast Ethernet, Gigabit Ethernet
10, 100, 1000
IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Yes
5 - 95 %
32 - 122 °F
0 - 50 °C
5 - 95 %
-30 - 70 °C
16.4 cm
0.25 kg
6.4 cm
10.7 cm
1 pc(s)
Yes
2
50/60 Hz
100 - 240 V
32.4 Watt
0.097 kg
85044090
30 pc(s)
30 pc(s)
120 cm
327.8 kg
327.8 kg
110 cm
176.5 cm
176.5 cm
1200 pc(s)
1200 pc(s)
40 pc(s)
10.26 kg
32.5 cm
44.5 cm
9.2 kg
33.2 cm
2 Year(s)
109.8 x 62.2 x 24.5 mm
The DPE-301GS PoE splitter is used with end devices such as wireless access points, IP cameras and VoIP phones that don’t natively support PoE, but rather require DC power input of 5V, 9V or 12V. It receives PoE power on a network cable from a PoE switch or midspan injector, and splits the Ethernet and DC power into two separate cables. One cable provides the DC power, and the other cable provides the Ethernet signal. Users can select from 5VDC, 9VDC and 12VDC power for their device using a selectable DIP switch on the device.
The DPE-301GS PoE splitter is typically located near the end device. It has two 10/100/1000 RJ-45 ports. One port is for PoE IN, which is the network connection and is usually connected to a remote PoE switch or injector. The other port is for LAN OUT, which is the connection that provides the Ethernet signal to the end device. The DPE-301GS also has a 5.5mm DC OUT port. Two adapter cables are supplied; either one may be connected to this port, depending on whether 5.5mm or 3.8mm interface is required for the end device.
*The product data above is provided by Icecat. EET cannot be held responsible for errors in relation to this.