MPN 2477A004
EAN / UPC 4960999581569
Lagerbestand
The TC-80N3 Timer Remote Controller is a remote switch with a 2.6ft cord and a self-timer, interval timer, long-exposure timer, and exposure-count setting feature. The timer can be set anywhere from 1 second to 99 hours. A new dial enables you to easily enter the numeric settings with a single thumb. The LCD panel can also be illuminated. It has the new N-3 type connector, which locks with a simple push. The rear of the Controller has a slot to store the camera's remote control socket cap.
Remotely control your EOS camera with this advanced remote switch that helps to eliminant camera shake
See details clearly with an illuminated LCD panel, and easily enter numerical settings with a single thumb, thanks to a dial
Press down on the display Illumination button to lock settings and prevent accidental changes being made
A 2.6 ft / 80 cm cord enables for some distance between the device and your camera. For some instances of photography, like wildlife, where a greater distance is required, add a 10 m extension cable
Use with an intervalometer for time-lapse photography
Shoot long exposure and use the exposure counter to take a set number of pictures and stops
Accurately time exposures and shutter speed from 1 second to 99 hours, 59 minutes and 59 seconds, in one second increments
Ideal for family portraits or for when the camera is set up on a tripod or against the wall
CR2032
Wired
85299097
40 x 14 x 20 mm
0,22 kg
0,12 kg
85299097
1 Jahre)
The TC-80N3 Timer Remote Controller is a remote switch with a 2.6ft cord and a self-timer, interval timer, long-exposure timer, and exposure-count setting feature. The timer can be set anywhere from 1 second to 99 hours. A new dial enables you to easily enter the numeric settings with a single thumb. The LCD panel can also be illuminated. It has the new N-3 type connector, which locks with a simple push. The rear of the Controller has a slot to store the camera's remote control socket cap.
*Die oben genannten Produktdaten werden von Icecat zur Verfügung gestellt. EET ist nicht verantwortlich für eventuelle Fehler in diesem Zusammenhang.