- Startseite
- Netzwerk
- Kabelgebundenes Netzwerk
- Bridges & Repeaters
- Barox IP- / PoE-Midspan-Extender via UTP-cable – VI-UTP-2516A
Barox IP- / PoE-Midspan-Extender via UTP-cable
Barox IP- / PoE-Midspan-Extender via UTP-cable
MPN VI-UTP-2516A
Lagerbestand
The VI-UTP25xxA series includes PoE midspans with integrated extenders. It supports PoE according to IEEE802.3at and IEEE802.3af, as well as PoE++. From the midspan extender, IP and PoE signals can be transmitted over long distances via twisted pair cables such as Cat5e, Cat6, telephony cable (Cat3) or bell wire. The Midspans are designed in such a way that each port can be assigned the maximum power according to the standards mentioned if necessary. Each port is continuously monitored. This all...
Lesen Sie die vollständige BeschreibungIP/PoE extender for UTP cable
Distances up to 500m
PoE 802.1af, at and bt
Redundant power supply possible
Spezifikationen für VI-UTP-2516A
Design
Gestellmontage
Yes
LED-Anzeigen
Y/Yes
Menge pro Packung
1 Stück(e)
Produktfarbe
Black
Rack-Kapazität
1U
Network
Netzwerkstandards
IEEE 802.3/IEEE 802.3af/IEEE 802.3at/IEEE 802.3u
Verkabelungstechnik
10/100Base-T(X)
Operational conditions
Betriebstemperatur (TT)
-10 - 50 °C
Package dimensions
Depth (package,cm)
84 cm
Gross Weight
6.48 kg
Height (package,cm)
11.7 cm
Width (package,cm)
40 cm
Performance
Datenübertragungsrate
100 Mbit/s
Duplex-System
Full
Ethernet-LAN-Datenraten
10/100 Mbit/s
Maximum Übertragungsentfernung
500 m
Typ
Network transmitter
Unterstützte Kabeltypen
Cat5e/Cat6/Cat7
Ports & interfaces
Anzahl der USB 2.0-Anschlüsse
1
Anzahl RJ-45-Anschlüsse (Sender)
32
Power
AC-Eingangsspannung
230 V
Stromversorgung über Ethernet (PoE)
Yes
Product dimensions
Depth (product,cm)
30.5 cm
Height (product,cm)
4.4 cm
Net Weight
5.44 kg
Width (product,cm)
44.2 cm
Vendor information
Beschreibung
IP- / PoE-Midspan-Extender via UTP-cable
The VI-UTP25xxA series includes PoE midspans with integrated extenders. It supports PoE according to IEEE802.3at and IEEE802.3af, as well as PoE++. From the midspan extender, IP and PoE signals can be transmitted over long distances via twisted pair cables such as Cat5e, Cat6, telephony cable (Cat3) or bell wire. The Midspans are designed in such a way that each port can be assigned the maximum power according to the standards mentioned if necessary. Each port is continuously monitored. This allows dynamic power requirements to be recorded and met. At the same time, line or terminal device malfunctions are protected. Although the VI-UTP-25xxA is delivered ready for operation without any settings, the simple graphical user interface allows the setup of the device and each individual port.
Dokumente
*Die oben genannten Produktdaten werden von Icecat zur Verfügung gestellt. EET ist nicht verantwortlich für eventuelle Fehler in diesem Zusammenhang.