MPN VI-UTP-2508A
Lagerbestand
The VI-UTP25xxA series includes PoE midspans with integrated extenders. It supports PoE according to IEEE802.3at and IEEE802.3af, as well as PoE++. From the midspan extender, IP and PoE signals can be transmitted over long distances via twisted pair cables such as Cat5e, Cat6, telephony cable (Cat3) or bell wire. The Midspans are designed in such a way that each port can be assigned the maximum power according to the standards mentioned if necessary. Each port is continuously monitored. This all...
Lesen Sie die vollständige BeschreibungIP/PoE extender for UTP cable
Distances up to 500m
PoE 802.1af, at and bt
Redundant power supply possible
Yes
Y/Yes
1 Stück(e)
Black
1U
IEEE 802.3/IEEE 802.3af/IEEE 802.3at/IEEE 802.3u
10/100Base-T(X)
-10 - 50 °C
84 cm
4.3 kg
11.7 cm
40 cm
100 Mbit/s
Full
10/100 Mbit/s
500 m
Network transmitter
Cat5e/Cat6/Cat7
1
16
230 V
Yes
30.5 cm
4.4 cm
4.1 kg
44.2 cm
The VI-UTP25xxA series includes PoE midspans with integrated extenders. It supports PoE according to IEEE802.3at and IEEE802.3af, as well as PoE++. From the midspan extender, IP and PoE signals can be transmitted over long distances via twisted pair cables such as Cat5e, Cat6, telephony cable (Cat3) or bell wire. The Midspans are designed in such a way that each port can be assigned the maximum power according to the standards mentioned if necessary. Each port is continuously monitored. This allows dynamic power requirements to be recorded and met. At the same time, line or terminal device malfunctions are protected. Although the VI-UTP-25xxA is delivered ready for operation without any settings, the simple graphical user interface allows the setup of the device and each individual port.
*Die oben genannten Produktdaten werden von Icecat zur Verfügung gestellt. EET ist nicht verantwortlich für eventuelle Fehler in diesem Zusammenhang.