- Startseite
- Netzwerk
- Kabelgebundenes Netzwerk
- Bridges & Repeaters
- Barox IP / PoE extender via coaxial cable – UP-COAX-TX-RX
Barox IP / PoE extender via coaxial cable
Barox IP / PoE extender via coaxial cable
MPN UP-COAX-TX-RX
Lagerbestand
The UP-COAX-TX/RX series devices transmit 10/100Mbps Ethernet and PoE/PoE+ with coaxial cable up to a distance of 300m. The devices are supplied and used in pairs, the UP-COAX-TX on the camera side and the UP-COAX-RX on the server side. The extenders make it possible to pass on the PoE supply, e.g. of a midspan, directly via coaxial cable. Power is supplied exclusively via PoE, i.e. even if the camera does not require PoE, a PoE injector, midspan or switch must be used at the beginning of the li...
Lesen Sie die vollständige BeschreibungIP / PoE extender via coaxial cable
Distances up to 300m
PoE 802.1af and at
Power supply exclusively via PoE
Spezifikationen für UP-COAX-TX-RX
Design
LED-Anzeigen
Yes
Produktfarbe
Black
Network
Netzwerkstandards
IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x
Verkabelungstechnik
10/100Base-T(X)
Operational conditions
Betriebstemperatur (TT)
-10 - 55 °C
Package dimensions
Depth (package,cm)
12.2 cm
Gross Weight (Package, kg)
0.16 kg
Height (package,cm)
4 cm
Width (package,cm)
10.6 cm
Performance
Art
Network transmitter & receiver
Datenübertragungsrate
100 Mbit/s
Duplex-System
Full
Ethernet-LAN-Datenraten
10, 100
Maximum Übertragungsentfernung
300 m
Unterstützung der Flusskontrolle
Yes
Ports & interfaces
Anzahl RJ-45 Anschlüsse (Empfänger)
1
Anzahl RJ-45-Anschlüsse (Sender)
1
Power
Stromversorgung über Ethernet (PoE)
Yes
Product dimensions
Depth (product,cm)
11.3 cm
Height (product,cm)
2.9 cm
Net Weight (Product, kg)
0.13 kg
Product Width
4.6 cm
Vendor information
Beschreibung
IP / PoE extender via coaxial cable
The UP-COAX-TX/RX series devices transmit 10/100Mbps Ethernet and PoE/PoE+ with coaxial cable up to a distance of 300m. The devices are supplied and used in pairs, the UP-COAX-TX on the camera side and the UP-COAX-RX on the server side. The extenders make it possible to pass on the PoE supply, e.g. of a midspan, directly via coaxial cable. Power is supplied exclusively via PoE, i.e. even if the camera does not require PoE, a PoE injector, midspan or switch must be used at the beginning of the line. The devices do not require any software configuration. Diagnostic LEDs provide an overview of the operating status. The modules of the UP-COAX-TX/RX series are designed as table-top models. Several units can be joined together laterally.
Dokumente
*Die oben genannten Produktdaten werden von Icecat zur Verfügung gestellt. EET ist nicht verantwortlich für eventuelle Fehler in diesem Zusammenhang.