- Startseite
- Netzwerk
- Kabelgebundenes Netzwerk
- Netzwerk-Switches
- Netzwerk-Switch-Komponenten
- Hewlett Packard Enterprise HP HSR6804 Router Opacity Shield Kit – JG676A
Hewlett Packard Enterprise HP HSR6804 Router Opacity Shield Kit
Hewlett Packard Enterprise HP HSR6804 Router Opacity Shield Kit
MPN JG676A
Lagerbestand
Preparing for installation
- The installation procedures must be performed by qualified personnel.
- Before installation, read the compliance and safety manual for the compatible device of the FIPS opacity shield kit.
- Wear an ESD wrist strap, and make sure the wrist strap makes good skin contact and is reliably grounded.
- Make sure the operating temperature is not higher than 40°C (104°F).
- Ensure enough clearance for installation.
- Face the front of the chassis...
Spezifikationen für JG676A
Features
Produktfarbe
Black
Operational conditions
Betriebstemperatur (TT)
0 - 40 °C
Package dimensions
Gross Weight (Package, kg)
1 kg
Performance
Kompatibilität
HP HSR6804
Product dimensions
Net Weight (Product, kg)
0,9 kg
Vendor information
Brand Name
Warranty
1 Jahre)
Beschreibung
HP HSR6804 Router Opacity Shield Kit
Preparing for installation
- The installation procedures must be performed by qualified personnel.
- Before installation, read the compliance and safety manual for the compatible device of the FIPS opacity shield kit.
- Wear an ESD wrist strap, and make sure the wrist strap makes good skin contact and is reliably grounded.
- Make sure the operating temperature is not higher than 40°C (104°F).
- Ensure enough clearance for installation.
- Face the front of the chassis to locate the installation positions (left and right).
- If the device has been mounted in a rack, remove it from the rack
Installing the opacity shield
Only use the screws and hex bolts that are supplied in the opacity shield kit to secure the opacity shield.
*Die oben genannten Produktdaten werden von Icecat zur Verfügung gestellt. EET ist nicht verantwortlich für eventuelle Fehler in diesem Zusammenhang.