MPN 545075
produktové číslo W128258710
Úroveň zásob
The Intellinet Network Solutions Gigabit Ethernet WDM (bi-directional wavelength division multiplexing) Media Converter utilizes a single strand of fibre to transmit network traffic on separate receive and transmit wavelengths (1310/1550 nm). This innovative technology allows you to effectively use the two strands for two independent connections or to double the capacity without digging in a second fibre cable. The converter is completely transparent to the network so the network performs exactl...
Přečtěte si úplný popisFibre SC-type dual-wavelength single-mode port connects over distances of up to 20 km (12.4 miles)
Must be used with Gigabit Ethernet WDM Bi-Directional Single Mode Media Converter, model 545068
Data transfer rate: 10/100/1000 Mbps
WDM (wavelength division multiplexing) technology utilizes only one strand of fibre to transmit data on separate receive and transmit wavelengths
Wavelengths: receive (RX), 1310 nm; transmit (TX), 1550 nm
One 10/100/1000Base-TX RJ45 port, maximum distance 100 m / 300 ft.
RJ45 port with Auto MDI/MDI-X support
Status LEDs for easy monitoring of device status
Functions as a stand-alone converter or can be used with the 14-slot Media Converter Chassis, model 507356
External power adapter, 5 VDC
FCC Class A, CE
Metal
No
Status
Black
85176990
Yes
Cat5/Fiber
1000Base-T/1000Base-TX/100Base-TX/10Base-T
1000Base-LX
Full
Gigabit Ethernet
10/100/1000 Mbit/s
1000BASE‑LX
1000 Mbit/s
IEEE 802.3/IEEE 802.3ab/IEEE 802.3u/IEEE 802.3z
10 - 80 %
0 - 50 °C
-20 - 70 °C
0,23 kg
Yes
10/125/8.3/125/8.7/125/8/125 µm
Single-mode
20000 m
100000 Hour
-22 dBmW
-3 dBmW
-8 dBmW
1550 nm
Yes
Wired
Yes
1
SC
1
Yes
1.2 A
12 V
5 Watt
2,5 cm
0,18 kg
10,5 cm
6,9 cm
1 Rok (y)
The Intellinet Network Solutions Gigabit Ethernet WDM (bi-directional wavelength division multiplexing) Media Converter utilizes a single strand of fibre to transmit network traffic on separate receive and transmit wavelengths (1310/1550 nm). This innovative technology allows you to effectively use the two strands for two independent connections or to double the capacity without digging in a second fibre cable. The converter is completely transparent to the network so the network performs exactly the way it did before - only now it can support both copper and fibre mediums.
Expands the Size of an Existing Network
This converter Provides fibre connectivity to Ethernet segments, allowing for even further networking expansion between extended workgroups. It also provides building-to-building connectivity without the cost and disruption associated with the installation of additional routers.
Enhances the Distance between Networking Devices
Connecting the converter to fibre segments can further extend distances between networking nodes. This can be achieved by direct connection between the converter and a fibre-based node or networking device.
Cabling Flexibility
Network managers can install fibre cabling anywhere within a network without changing the arrangement of copper-based Ethernet. The compact size of the converter allows it to be easily deployed in any narrow desktop location or to be used in a wallmount installation. Several converters can be simultaneously installed into a 19"; rack-mountable chassis.
*Výše uvedené údaje o produktu poskytuje společnost Icecat. EET nenese odpovědnost za chyby v této souvislosti.