MPN 508544
produktové číslo W128824972
Úroveň zásob
Media Converter with Gigabit Ethernet - Expand the size of an existing network
The Intellinet Network Solutions Gigabit Ethernet Media Converter offers the network designer a device for migration from copper-based Ethernet to Fiber Ethernet. It offers maximum flexibility with 10/100/1000Base-TX and auto-negotiation. Now, migration or expansion of existing networks can be achieved with minimum cost and complexity.
More connectivity options
The converter is completely transparent ...
One 10/100/1000 RJ45 port supporting a maximum distance of 100 m (300 ft.)
One 1000Base-SX fiber SC multi-mode port supporting a maximum distance of 550 m (1,800 ft.)
Supports full-duplex and half-duplex modes with autonegotiation
Link Fault Passthrough (LFP) function for easier network maintenance
QoS (Quality of Service) bandwidth management
IEEE 802.1Q VLAN tagging compliant
Cut-through and store-and-forward switching architecture
Wavelength: 850 nm
Supports jumbo frames up to 9.2 kBytes
Status LEDs for power and Link/TX on both ports
FCC Class B, CE, RoHS, UKCA, NDAA
Metal
No
LAN/Link/Power/Signal strength
Yes
Cat5e
Full/Half
Fast Ethernet/Gigabit Ethernet
10/100/1000 Mbit/s
9,2
Yes
Yes
IEEE 802.1D/IEEE 802.1p/IEEE 802.1Q/IEEE 802.3/IEEE 802.3ab/IEEE 802.3u/IEEE 802.3z
Yes
UTP/STP
Yes
5 - 90 %
-10 - 55 °C
-40 - 70 °C
0,26 kg
Yes
Yes
Yes
50/125/62.5/125 µm
Multi-mode
550 m
-3 dBmW
-9 dBmW
850 nm
Wired
1
SC
2
Yes
2,6 cm
0,2 kg
7 cm
9,4 cm
3 rok/roky
1 Rok (y)
Media Converter with Gigabit Ethernet - Expand the size of an existing network
The Intellinet Network Solutions Gigabit Ethernet Media Converter offers the network designer a device for migration from copper-based Ethernet to Fiber Ethernet. It offers maximum flexibility with 10/100/1000Base-TX and auto-negotiation. Now, migration or expansion of existing networks can be achieved with minimum cost and complexity.
More connectivity options
The converter is completely transparent to the network, so the network performs exactly the way it did before, only now it can support both copper and fiber media. The Gigabit Ethernet Media Converter provides fiber connectivity to Ethernet segments, allowing for even greater networking expansion between extended workgroups. It also provides building-to-building connectivity without the cost and disruption associated with installing additional routers.
Distance extension between networking devices
Connecting the converter to fiber segments further extends distances between network nodes, offering increased spatial and distance options for networks where none existed before.
Greater cabling flexibility
Network managers can install fiber cabling anywhere within a network without changing the arrangement of their copper-based Ethernet. The compact size of the converter allows it to be easily deployed in any narrow desktop location or to be used in a wall-mount installation. Several Gigabit Ethernet Media Converters can be simultaneously installed into a 19" rackmountable chassis (available from Intellinet Network Solutions), providing much-needed flexibility for networks.
*Výše uvedené údaje o produktu poskytuje společnost Icecat. EET nenese odpovědnost za chyby v této souvislosti.