MPN 507332
EAN / UPC 0766623507332
Úroveň zásob
The Intellinet Network Solutions Fast Ethernet Single Mode Media Converter was specifically designed to offer the network designer a device for migration from copper-based Ethernet to Fibre Ethernet. Now migration or expansion of existing networks can be achieved with minimum cost and complexity. The converter is completely transparent to the network so the network performs exactly the way it did before - only now it can support both copper and fibre mediums.
Expands the Size of an Ex...
Fibre SC single-mode port connects over distances of up to 20 km (12.4 miles)
Data transfer rate: 100 Mbps
10/100Base-TX RJ45 port, maximum distance 100 m / 300 ft.
RJ45 port with Auto MDI/MDI-X support and auto-negotiation
100Base-FX single-mode Fibre SC duplex port
Wavelength: 1310 nm
Status LEDs for power and Link/TX for both ports
External power adapter, 5 VDC
Functions as a stand-alone converter or can be used with the 14-slot media converter chassis, model 507356
Three-Year Warranty
FCC B, CE
Metal
No
Activity/Link/Power
85176990
Yes
100BASE-FX/100Base-TX
100Base-FX
Full
Fast Ethernet
10/100 Mbit/s
100 Mbit/s
IEEE 802.3/IEEE 802.3u
10 - 90 %
0 - 50 °C
-45 - 70 °C
Yes
Yes
Single-mode
20000 m
100000 Hour
-32 dBmW
1310 nm
SC
Yes
1 A
5 V
5 Watt
2,6 cm
0,18 kg
10,5 cm
7 cm
1 Rok (y)
The Intellinet Network Solutions Fast Ethernet Single Mode Media Converter was specifically designed to offer the network designer a device for migration from copper-based Ethernet to Fibre Ethernet. Now migration or expansion of existing networks can be achieved with minimum cost and complexity. The converter is completely transparent to the network so the network performs exactly the way it did before - only now it can support both copper and fibre mediums.
Expands the Size of an Existing Network
Provides fibre connectivity to Ethernet segments, allowing for even further networking expansion between extended workgroups. Also provides building-to-building connectivity without the need for the cost and disruption associated with the installation of additional routers.
Enhances the Distance between Networking Devices
Connecting the converter to fibre segments can further extend distances between networking nodes. This can be achieved by direct connection between the converter and a fibre-based node or networking device.
Cabling Flexibility
Network managers can install fibre cabling anywhere within a network without changing the arrangement of copper-based Ethernet. The compact size of the converter allows it to be easily deployed in any narrow desktop location, and up to 14 media converters can be simultaneously installed into a 19"; rack-mountable chassis (model 507356).
*Výše uvedené údaje o produktu poskytuje společnost Icecat. EET nenese odpovědnost za chyby v této souvislosti.