Mount with tilt swivel

Please read all of the instructions and look at the pictures before attaching the mount.

1. Loosen the screw in the center of the mount so you can remove the tilt swivel attaching plate on the back.

2. Place the attaching plate on desired position. Screw the attaching plate into place with the enclosed screws. Place the mount over the attaching plate so the tilt swivel fits. Screw the mount onto the attaching plate.

3. To attach the device onto the mount: Place the device over the mount and press it straight downwards into the grooves in the mount.
To remove the device from the mount: Slide the device straight upwards and out from the mount.

4. The mount is in place.