MPN KVR26S19D8/16
EAN/UPC 740617280623
Lagernivå
This document describes ValueRAM's KVR26S19D8/16 is a 2G x 64-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 2Rx8, non-ECC, memory module, based on sixteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin DIMM uses gold contact fingers.
Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
Low-power auto self refresh (LPASR)
Data bus inversion (DBI) for data bus
On-die VREFDQ generation and calibration
Dual-rank
On-board I2 serial presence-detect (SPD) EEPROM
16 internal banks; 4 groups of 4 banks each
Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
Selectable BC4 or BL8 on-the-fly (OTF)
Fly-by topology
19
UL 94 V-0
Laptop
Yes
16 GB
DDR4
Yes
Gold
Yes
Yes
2666 MHz
260-pin SO-DIMM
1 x 16 GB
2
1.2
2048M x 64
2,5 V
350 Nanosecond
Yes
32 Nanosecond
45,75 Nanosecond
Yes
84733020
0 - 85 °C
-55 - 100 °C
84733020
6,6 cm
0,1 kg
0,9 cm
8,1 cm
0,09000000000000001 kg
0,37 cm
3 cm
6,96 cm
Halogen
RoHS
Halogen
RoHS
1 År
This document describes ValueRAM's KVR26S19D8/16 is a 2G x 64-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 2Rx8, non-ECC, memory module, based on sixteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin DIMM uses gold contact fingers.
*Produktdatan ovan tillhandahålls av Icecat. EET kan inte hållas ansvarigt för fel i samband med detta.