MPN KP300A
Lagernivå
Kingpins newly updated remote control system will let you control your screen in many different ways. The remote control send signals by RF but you can also program the receiver by the IR-eye, send the signals by line-IR (i.g. Crestron), use the projector 12-volt trigger signal or the old fashioned way by the buttons on the controlbox. The new function is to control this box by Contact Closure from I/O out or similar.
At the backside of the controlbox there is a smart cabel management sys...
N/No
Press buttons
IR/RF Wireless
White
Projection screen
N/No
5 - 40 °C
0,28 kg
Y/Yes
20 m
433,92 MHz
6.3 A
0,28 kg
5,5 cm
12 cm
14,5 cm
3 År
Kingpins newly updated remote control system will let you control your screen in many different ways. The remote control send signals by RF but you can also program the receiver by the IR-eye, send the signals by line-IR (i.g. Crestron), use the projector 12-volt trigger signal or the old fashioned way by the buttons on the controlbox. The new function is to control this box by Contact Closure from I/O out or similar.
At the backside of the controlbox there is a smart cabel management system. If you mount the controlbox by a corner you may want the cords to come out either on the right or the left side of the box or maybe both cords at the top if mounted to a ceiling. Use the cable tracks and bend out the knock-out-holes for suitable mounting.
This remote control system is included in the Electric Screens, but it can also be bought separatly.
*Produktdatan ovan tillhandahålls av Icecat. EET kan inte hållas ansvarigt för fel i samband med detta.