Planet 10/100BASE-TX to 100BASE-FX (ST, MM) Bridge Media Converter -- 2km

Planet 10/100BASE-TX to 100BASE-FX (ST, MM) Bridge Media Converter -- 2km

MPN FT-801

EAN/UPC 4711213680519

Lagernivå

PLANET FT-80x is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected devic...

Läs hela beskrivningen
  • Complies with IEEE 802.3, IEEE 802.3u 10/100BASE-TX, 100BASE-FX standard

  • Connectors: One RJ45 (auto-MDI/MDI-X) twisted pair, EIA568

  • One fiber-optic, 1310nm wavelength, connector type and distance vary with model

  • FT-806A20 / FT-806A60: Tx-1310nm, Rx-1550nm

  • FT-806B20 / FT-806B60: Tx-1550nm, Rx-1310nm

  • Data Transfer Rate:

  • TP: 10/100Mbps

  • FX: 100Mbps

  • Duplex mode support:

  • Full or half-duplex mode by auto-negotiation (TP)

Specifikationer för FT-801

Design

Certification

FCC, CE

Housing material

Metal

Internal

No

LED indicators

Yes

Product colour

Black

Network

Auto MDI/MDI-X

Yes

Converter input interface

100Base-TX

Converter output interface

100Base-FX

Duplex system

Full, Half

Ethernet interface type

Fast Ethernet

Ethernet LAN data rates

10, 100

Maximum data transfer rate

100 Mbit/s

Networking standards

IEEE 802.3, IEEE 802.3u, IEEE 802.3x

Operational conditions

Operating relative humidity (H-H)

5 - 90 %

Operating temperature (T-T)

0 - 50 °C

Storage relative humidity (H-H)

5 - 90 %

Storage temperature (T-T)

-40 - 70 °C

Package dimensions (verified)

Depth Verified

14 cm

Gross Weight Verified

0,458 kg

Height Verified

7,1 cm

Width Verified

28,5 cm

Performance

Fiber cable diameters supported (core/cladding)

50/125, 62.5/125

Fiber mode structure

Multi-mode

Maximum transfer distance

2000 m

Sensitivity

-31,8 dBmW

Tx power (max)

-14 dBmW

Tx power (min)

-23,5 dBmW

Wavelength

1310 nm

Ports & interfaces

Connectivity technology

Wired

DC-in jack

Yes

Ethernet LAN (RJ-45) ports

1

Fiber optic connector

ST

Fiber ports quantity

1

Power

Input current

2 A

Input voltage

5 V

Product dimensions

Net Weight (Product, kg)

0,19 kg

Product Depth

9,7 cm

Product Height

2,6 cm

Product Width

7 cm

Technical details

Harmonized System (HS) code

85176990

Vendor information

Brand Name

Warranty

3 År

Beskrivning

10/100BASE-TX to 100BASE-FX (ST, MM) Bridge Media Converter -- 2km

PLANET FT-80x is a Fast Ethernet Bridge 100BASE-FX fiber to 10/100BASE-TX shielded twisted pair (STP) converter. It supports both half-duplex and full-duplex operations and a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation in fiber-optic interface. The fiber port of the converter operates at 1310 nm and uses ST, SC, MTRJ, VF45 or WDM connectors. Multi-mode models that support distances up to 2km and single-mode models that support distances up to 15/20/35/50/60km are available.media and provide efficient solution to monitoring the net.

The FT-80x series is with LFP (Link Fault Pass-through function) (LLCF/LLR) and the DIP switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net. The DIP switch provides the disabling or enabling of the LFP function

LLCF (Link Loss Carry Forward) means when a device is connected to the converter and the TP line loses the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device is connected to the converter and the fiber line loses the link, the converter's fiber will disconnect the transmit link. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitoring the net.

*Produktdatan ovan tillhandahålls av Icecat. EET kan inte hållas ansvarigt för fel i samband med detta.

EET SverigeCylindervägen 20, vån 7 Box 4124131 04 NackaMomsreg.nr SE556242676601
Sverige / Svenska